Paper
25 September 2007 Measurement of broad absorption features using a tunable external cavity quantum cascade laser
Author Affiliations +
Abstract
We demonstrate the use of a tunable external cavity quantum cascade laser system for measurement of broad absorption features in the mid-infrared spectral region. The thermoelectrically cooled external cavity laser was tuned over a 65 cm-1range centered at 8.7 microns using stepper motor control. Pulsing the laser at a high duty cycle provided 2-4.5 mW average output power over the tuning range, and enabled phase-sensitive detection of amplitude-modulated signals. We used the laser system to measure the absorption spectra of Freon-125 using a Herriott cell. In addition, the absorption spectrum of water in the laboratory air was measured. The measurements showed excellent agreement with reference spectra, in both wavelength and amplitude. The measured scan resolution of 0.14 cm-1 is suitable for measurement of the absorption features of complex molecules as well as simple molecules with atmospherically broadened lines. We discuss the limits to the scan resolution due to effects of spectral chirp and mode-hops during pulsed operation.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mark C. Phillips, Tanya L. Myers, Michael D. Wojcik, Bret D. Cannon, Matthew S. Taubman, and David C. Scott "Measurement of broad absorption features using a tunable external cavity quantum cascade laser", Proc. SPIE 6760, Infrared, Mid-IR, and Terahertz Technologies for Health and the Environment II, 676003 (25 September 2007); https://doi.org/10.1117/12.732616
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Quantum cascade lasers

Mirrors

Fabry–Perot interferometers

Molecules

FT-IR spectroscopy

Pulsed laser operation

Back to Top