Paper
29 November 2007 Fabrication of temperature-insensitive chirped fiber grating pressure sensor
Meng Jiang, Weigang Zhang, Long Jin, Changjun Liu, Qi Zhang, Yaping Liu, Bo Liu
Author Affiliations +
Abstract
Based on the transfer matrix method, the reflection spectra of strained chirped fiber gratings are analyzed theoretically. Chirped fiber gratings are fabricated by etching uniform FBGs with HF. The cross section of the chirped FBG has a gradient variation along the axis. The full width at half maximum of the refection spectra of the chirped fiber grating can reach 0.4-0.75nm. When axial stress is applied on the chirped FBG, the bandwidth can reach 5nm. The sensitivity of the bandwidth to stress can achieved 20% higher than that of uniform fiber Bragg gratings. The relationship of the bandwidth and the imposed force, as well as the one between the reflection power and the force, derived from the coupled mode theory, will also be tested in the experiments, which has been shown in this paper.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Meng Jiang, Weigang Zhang, Long Jin, Changjun Liu, Qi Zhang, Yaping Liu, and Bo Liu "Fabrication of temperature-insensitive chirped fiber grating pressure sensor", Proc. SPIE 6830, Advanced Sensor Systems and Applications III, 683018 (29 November 2007); https://doi.org/10.1117/12.755194
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Cladding

Reflection

Corrosion

Refractive index

Fiber optics sensors

Sensors

RELATED CONTENT

Etched multimode fiber Bragg gratings based refractometer
Proceedings of SPIE (August 29 2017)
Optical sensor based on hybrid LPG FBG in D fiber...
Proceedings of SPIE (February 14 2005)
Fiber grating evanescent-wave sensors
Proceedings of SPIE (December 10 1996)

Back to Top