Paper
12 February 2008 Recent progress on polymer optical waveguides
Author Affiliations +
Abstract
Intensive research on optical interconnection over flexible optical circuit boards has been undertaken for such applications as high-end routers, servers and cellular phones. And these flexible optical circuit boards are expected to be used for polymer optical waveguides. This paper reports recent progress on polymer optical waveguides. It also describes a flexible stamping method, which employs a flexible film stamp made of polymeric materials. Unlike conventional hard stamps, the flexible film stamp does not require either the stamp or its substrate to be perfectly flat, which means large area stamping is easy to achieve at reduced cost. We confirmed this by replicating 50 μm multi-mode optical polymer waveguides. The propagation loss of the waveguide is fairly low at 0.06 dB/cm at a wavelength of 850 nm. This loss is sufficiently small to meet the basic requirement for optical circuit boards, and the waveguide was used to fabricate a flexible optical circuit board with MT connectors.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Junya Kobayashi "Recent progress on polymer optical waveguides", Proc. SPIE 6891, Organic Photonic Materials and Devices X, 68910O (12 February 2008); https://doi.org/10.1117/12.760872
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Polymers

Polymer multimode waveguides

Polymer thick film flex circuits

Optical circuits

Connectors

Cladding

RELATED CONTENT


Back to Top