Cathode effect on current-voltage characteristics of blue light-emitting diodes based on a polyspirofluorene

G. Garcia-Belmonte; E. M. Barea; Y. Ayyad-Limonge; J. M. Montero; H. J. Bolink; J. Bisquert

doi:10.1117/12.780499

16 April 2008 Cathode effect on current-voltage characteristics of blue light-emitting diodes based on a polyspirofluorene

G. Garcia-Belmonte, E. M. Barea, Y. Ayyad-Limonge, J. M. Montero, H. J. Bolink, J. Bisquert

Author Affiliations +

Proceedings Volume 6999, Organic Optoelectronics and Photonics III; 69992U (2008) https://doi.org/10.1117/12.780499
Event: SPIE Photonics Europe, 2008, Strasbourg, France

Abstract

Current-voltage characteristics of polyspiroblue SB -based light-emitting diodes with the structure: ITO/PEDOT:PSS/SB/cathode have been analyzed. Several cathodes were used (Al, LiF with different thicknesses, and Ba) in order to change the barrier for electron injection. As expected, the inclusion of a thin (0.5-1 nm) LiF layer between SB and Al, or the use of Ba, modifies the electron barrier as derived from the increment in the turn-on voltage (related to the built-in potential) with respect to that observed for Al cathode. For hole-only devices (Au cathode) J-V characteristics are interpreted in terms of bulk-limited SCLC transport with hole mobility of the order of 10^-6 cm²/V s. When J-V characteristics obtained using different cathodes are compared the current level observed are consistent with the mobility observed for the hole only device. This implies that the device operation is mainly determined by the hole conduction. However, the electroluminescence observed for these devices employing different cathodes differs over four orders of magnitude. Our results suggest that the electron mobility is much smaller than the hole mobility and that the recombination process is confined to a thin layer near the cathode. Additionally, the results obtained from simple device modeling are also presented.

Citation Download Citation

G. Garcia-Belmonte, E. M. Barea, Y. Ayyad-Limonge, J. M. Montero, H. J. Bolink, and J. Bisquert "Cathode effect on current-voltage characteristics of blue light-emitting diodes based on a polyspirofluorene", Proc. SPIE 6999, Organic Optoelectronics and Photonics III, 69992U (16 April 2008); https://doi.org/10.1117/12.780499

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
5 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Aluminum

Barium

Laser induced fluorescence

Metals

Polymers

Electroluminescence

Organic light emitting diodes

Show All Keywords

Keywords/Phrases

Search In:

Publication Years