Low-scatter bare aluminum optics via chemical mechanical polishing

Kevin J. Moeggenborg; Carlos Barros; Stanley Lesiak; Nevin Naguib; Stan Reggie

doi:10.1117/12.795189

29 August 2008 Low-scatter bare aluminum optics via chemical mechanical polishing

Kevin J. Moeggenborg, Carlos Barros, Stanley Lesiak, Nevin Naguib, Stan Reggie

Author Affiliations +

Proceedings Volume 7060, Current Developments in Lens Design and Optical Engineering IX; 706002 (2008) https://doi.org/10.1117/12.795189
Event: Optical Engineering + Applications, 2008, San Diego, California, United States

Abstract

Traditionally, aluminum optics have been produced via a combination of machining, lapping, and diamond turning techniques. The surface roughness and diffraction grating effects resultant from diamond turning have largely limited the use of these optics to IR applications. Work arounds for this problem have included nickel coatings which are subsequently polished to a required finish for use in visible and/or ultraviolet spectra. Unfortunately, this introduces additional costs as well as bimetallic effects that can limit the application of such components. We have developed chemical mechanical polishing (CMP) techniques that allow high quality optical surfaces to be produced on bare aluminum alloy such as 6061-T6. Alloy properties such as grain size, inclusions, and voids can impact all types of finishing processes. The CMP method, however, has been very robust in polishing performance over a range of alloy types and properties. Surface roughness <20 Å rms is readily attainable with this process, and values below 10 Å have been produced with proper process conditions and alloy properties. The monolithic mirrors produced via CMP techniques have been compared against other current alternatives such as diamond turned aluminum, nickel coated aluminum, and aluminized glass. Data indicate the aluminum mirrors produced via CMP can provide performance improvements versus the alternatives based on measurements comparing parameters such as surface roughness, surface quality, reflectivity, and bidirectional reflectance distribution function.

Citation Download Citation

Kevin J. Moeggenborg, Carlos Barros, Stanley Lesiak, Nevin Naguib, and Stan Reggie "Low-scatter bare aluminum optics via chemical mechanical polishing", Proc. SPIE 7060, Current Developments in Lens Design and Optical Engineering IX, 706002 (29 August 2008); https://doi.org/10.1117/12.795189

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE