Paper
12 January 2009 High temperature (till 1500°C) contemporary thermal conductivity and thermal diffusivity measurements with the step flat heat source
Gianluigi Bovesecchi, Paolo Coppa
Author Affiliations +
Proceedings Volume 7133, Fifth International Symposium on Instrumentation Science and Technology; 71333P (2009) https://doi.org/10.1117/12.812398
Event: International Symposium on Instrumentation Science and Technology, 2008, Shenyang, China
Abstract
The method for contemporary measuring thermal conductivity, thermal diffusivity and thermal contact resistance up to 1500°C has been assessed. First the heat propagation model has been developed to be used in least square procedure to process temperature data and give the best estimate on the unknown parameters. Second special devices to be used in the experimental procedure have been designed and built or are going to be built. In the meanwhile ambient temperature tests on bricks have been carried out to establish the data processing procedure, and to recognize the experimental troubles likely to be found. These tests shows that the experimental data well follow the theoretical prediction, the thermophysical parameter can be evaluated with good accuracy, and that care must be taken to satisfying the theoretical assumptions on the base of the model, and to accurately process data for taking into account mutual dependence of the parameters.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gianluigi Bovesecchi and Paolo Coppa "High temperature (till 1500°C) contemporary thermal conductivity and thermal diffusivity measurements with the step flat heat source", Proc. SPIE 7133, Fifth International Symposium on Instrumentation Science and Technology, 71333P (12 January 2009); https://doi.org/10.1117/12.812398
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top