PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
New methods to fabricate a metallic closed cellular material for smart materials using an isostatic pressing, spark plasma
sintering (SPS) method and penetrating method are introduced. Powder particles of polymer or ceramics coated with a
metal layer using electro-less plating were pressed into pellets and sintered at high temperatures by sintering at high
temperature. Also these powder particles were sintered by spark plasma sintering (SPS) method. Also a many kinds of
closed cellular materials with different materials of cell walls and different materials inside of the cell were tried to
fabricate. The physical, mechanical and thermal properties of this material were measured. The results of the
compressive tests show that this material has the different stress-strain curves among the specimens that have different
thickness of the cell walls and the sintering temperatures of the specimens affect the compressive strength of each
specimen. Also, the results of the compressive tests show that this material has high-energy absorption and Young's
modulus of this material depends on the thickness of the cell walls and sintering conditions. The internal friction of this
material was measured and the results show that this internal friction is same as that of pure aluminum.
Satoshi Kishimoto
"Closed cellular materials for smart materials", Proc. SPIE 7375, ICEM 2008: International Conference on Experimental Mechanics 2008, 73755T (25 August 2009); https://doi.org/10.1117/12.839356
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Satoshi Kishimoto, "Closed cellular materials for smart materials," Proc. SPIE 7375, ICEM 2008: International Conference on Experimental Mechanics 2008, 73755T (25 August 2009); https://doi.org/10.1117/12.839356