Paper
11 May 2009 A new optical measurement method for verifying the exact change of thin films on the QZ blanks with ellipsometer
Songbae Moon, Seong-Yoon Kim, Gyung-Yoon Bang, Byung-Gook Kim, Sang-Gyun Woo, Han-ku Cho
Author Affiliations +
Abstract
The information of the chromium top layer is important in photomask fabrication. Resist coating process and optical transmittance change of chromium after mask cleaning process depend on the surface morphology and thickness. In this paper, we present that ellipsometry, the nondestructive optical measurement method, is an effective and convenient method for the inspection of chromium oxide on the quartz blank. We checked data obtained by ellipsometry for chromium surface morphology with atomic force microscope, for surface energy with contact angle measurement, and for optical density change with optical transmittance measurement. It turns out that ellipsometry gives successfully the information of chromium oxide on the quartz blank.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Songbae Moon, Seong-Yoon Kim, Gyung-Yoon Bang, Byung-Gook Kim, Sang-Gyun Woo, and Han-ku Cho "A new optical measurement method for verifying the exact change of thin films on the QZ blanks with ellipsometer", Proc. SPIE 7379, Photomask and Next-Generation Lithography Mask Technology XVI, 737913 (11 May 2009); https://doi.org/10.1117/12.824315
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Chromium

Oxides

Optical testing

Thin films

Ellipsometry

Photoresist processing

Atomic force microscopy

Back to Top