Application of principal component analysis to lidar data filtering and analysis

Vladimir V. Zavyalov; Gail E. Bingham; Michael Wojcik; Heidi Johnson; Marc Struthers

doi:10.1117/12.830126

9 October 2009 Application of principal component analysis to lidar data filtering and analysis

Vladimir V. Zavyalov, Gail E. Bingham, Michael Wojcik, Heidi Johnson, Marc Struthers

Author Affiliations +

Proceedings Volume 7479, Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing V; 747907 (2009) https://doi.org/10.1117/12.830126
Event: SPIE Remote Sensing, 2009, Berlin, Germany

Abstract

Principal Component Analysis (PCA) has proven to be a valuable tool for remote sensing data compression, pattern recognition, and for filtering out measurement noise. In this paper, we present preliminary results on the application of PCA technique to reduce random noise present in lidar observations. Typically, the SNR at a given range can be improved either by increasing the integration time of the measurements or by applying spatial averaging. This procedure, however, improves the SNR at the expense of the instrument's temporal and spatial resolution. The number of range bins needed to characterize backscatter features is far less than the number of components needed to characterize the distribution of these features in the atmosphere. The higher-order PCA components, which mainly serve to characterize noise, can be eliminated along with the noise that they characterize. The results of PCA noise filtering of lidar observations strongly depend on the variability of aerosol plumes. To avoid loss of information in the presence of highly variable aerosol plumes, it is necessary to use a conservative number of principal components higher then optimum for maximum noise reduction. Nevertheless, noise reduction factors of 2-8, depending on the lidar range and atmospheric variability, can still be achieved.

Citation Download Citation

Vladimir V. Zavyalov, Gail E. Bingham, Michael Wojcik, Heidi Johnson, and Marc Struthers "Application of principal component analysis to lidar data filtering and analysis", Proc. SPIE 7479, Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing V, 747907 (9 October 2009); https://doi.org/10.1117/12.830126

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE