A non-delta-chrome OPC methodology for process models with three-dimensional mask effects

Philip C. W. Ng; Kuen-Yu Tsai; Chih-Hsien Tang; Lawrence Melvin

doi:10.1117/12.846687

3 March 2010 A non-delta-chrome OPC methodology for process models with three-dimensional mask effects

Philip C. W. Ng, Kuen-Yu Tsai, Chih-Hsien Tang, Lawrence Melvin

Proceedings Volume 7640, Optical Microlithography XXIII; 76402P (2010) https://doi.org/10.1117/12.846687
Event: SPIE Advanced Lithography, 2010, San Jose, California, United States

Abstract

Delta-chrome optical proximity correction (OPC) has been widely adopted in lithographic patterning for semiconductor manufacturing. During the delta-chrome OPC iteration, a predetermined amount of chrome is added or subtracted from the mask pattern. With this chrome change, the change of exposure intensity error (IE) or the change of edge placement error (EPE) between the printed contour and the target pattern is then calculated based on standard Kirchhoff approximation. Linear approximation is used to predict the amount of the proper chrome change to remove the correction error. This approximation can be very fast and effective, but must be performed iteratively to capture interactions between chrome changes. As integrated circuit (IC) design shrinks to the deep sub-wavelength regime, previously ignored nonlinear process effects, such as three-dimensional (3D) mask effects and resist development effects, become significant for accurate prediction and correction of proximity effects. These nonlinearities challenge the deltachrome OPC methodology. The model response to mask pattern perturbation by linear approximation can be readily computed but inaccurate. In fact, computation of the mask perturbation response becomes complex and expensive. A non-delta-chrome OPC methodology with IE-based feedback compensation is proposed. It determines the amount of the proper chrome change based on IE without intensive computation of mask perturbation response. Its effectiveness in improving patterning fidelity and runtime is examined on a 50-nm practical circuit layout. Despite the presence and the absence of nonlinear 3D mask effects, our results show the proposed non-delta-chrome OPC outperforms the deltachrome one in terms of patterning fidelity and runtime. The results also demonstrate that process models with 3D mask effects limit the use of delta-chrome OPC methodology.

Citation Download Citation

Philip C. W. Ng, Kuen-Yu Tsai, Chih-Hsien Tang, and Lawrence Melvin "A non-delta-chrome OPC methodology for process models with three-dimensional mask effects", Proc. SPIE 7640, Optical Microlithography XXIII, 76402P (3 March 2010); https://doi.org/10.1117/12.846687

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available