Paper
15 July 2010 Fabrication of an absorber-coupled MKID detector and readout for sub-millimeter and far-infrared astronomy
Author Affiliations +
Abstract
We have fabricated absorber-coupled microwave kinetic inductance detector (MKID) arrays for sub-millimeter and farinfrared astronomy. Each detector array is comprised of λ/2 stepped impedance resonators, a 1.5μm thick silicon membrane, and 380μm thick silicon walls. The resonators consist of parallel plate aluminum transmission lines coupled to low impedance Nb microstrip traces of variable length, which set the resonant frequency of each resonator. This allows for multiplexed microwave readout and, consequently, good spatial discrimination between pixels in the array. The Al transmission lines simultaneously act to absorb optical power and are designed to have a surface impedance and filling fraction so as to match the impedance of free space. Our novel fabrication techniques demonstrate high fabrication yield of MKID arrays on large single crystal membranes and sub-micron front-to-back alignment of the microstrip circuit.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ari-David Brown, Wen-Ting Hsieh, S. Harvey Moseley, Thomas R. Stevenson, Kongpop U-yen, and Edward J. Wollack "Fabrication of an absorber-coupled MKID detector and readout for sub-millimeter and far-infrared astronomy", Proc. SPIE 7741, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy V, 77410P (15 July 2010); https://doi.org/10.1117/12.857281
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Semiconducting wafers

Aluminum

Resonators

Crystals

Niobium

Sensors

Back to Top