Paper
22 September 2010 Virtual prototyping and optimization of novel solar cell designs
James Pond, Mitsunori Kawano
Author Affiliations +
Proceedings Volume 7750, Photonics North 2010; 775028 (2010) https://doi.org/10.1117/12.873114
Event: Photonics North 2010, 2010, Niagara Falls, Canada
Abstract
Nano-scale structures have been proposed as a low cost mechanism to enhance solar cell efficiency. Computer simulations can be used to rapidly and cheaply prototype and optimize these novel designs, however the simulations are challenging due to the geometric complexity, the highly dispersive materials, and the necessity of performing broadband simulations over the solar spectrum. We show how the finite-difference time-domain (FDTD) method in conjunction with particle swarm optimization (PSO) can be used to efficiently optimize these designs. We apply the method to two specific examples: thin film silicon plasmonic solar cells and photonic crystal organic solar cells. In each case, optical enhancements of approximately 15% can be achieved. The optimization requires a few hundred simulations which can be achieved in a few hours on a good workstation. Finally, we consider the steps necessary to perform combined optical and electrical simulations to fully characterize these devices.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James Pond and Mitsunori Kawano "Virtual prototyping and optimization of novel solar cell designs", Proc. SPIE 7750, Photonics North 2010, 775028 (22 September 2010); https://doi.org/10.1117/12.873114
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Solar cells

Finite-difference time-domain method

Computer simulations

Data modeling

Particle swarm optimization

Plasmonics

Prototyping

Back to Top