Paper
18 August 2010 LED camera light with a compact wide-range zoom
Ulrich Hartwig, Henning Rehn
Author Affiliations +
Abstract
A design concept for an extremely compact zoom optics which is suitable for illumination applications is presented. Such optics is especially useful for camera or flash lights as the illuminated area can be adjusted according to the picture content of the photo or film camera. The principle of the design is as follows: Collimated light passes through two lenses, each with a freeform surface. The freeform surfaces face each other and fit into one another perfectly. When the two lenses are merged together, they basically represent a coplanar plate: The cone angle entering the merged lenses does not change while passing them. When the plates are separated, the light is scattered at the freeform surfaces. Due to the smooth characteristics of the freeform surfaces shape, the cone angle can be adjusted continuously with the distance of the zoom lenses. The distance of the zoom lenses, which is necessary for maximum angle widening, is dependent on the size of the structures of the freeform surfaces and can be reduced to the sub-millimeter range. The compactness of the resulting device is a major advantage of the design concept. The principle of operation of the design could be shown by the construction of a prototype. It features a LED light source and a zoom range of 5° to 30° (cone angle). The luminous flux of the device is approx. 650 lm.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ulrich Hartwig and Henning Rehn "LED camera light with a compact wide-range zoom", Proc. SPIE 7785, Nonimaging Optics: Efficient Design for Illumination and Solar Concentration VII, 77850G (18 August 2010); https://doi.org/10.1117/12.859442
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zoom lenses

Lenses

Cameras

Light emitting diodes

Prototyping

Collimation

Lamps

RELATED CONTENT

Optical design of low glare luminaire applied for tunnel light
Proceedings of SPIE (September 26 2014)
Design on the photographic lamps for panoramic imaging
Proceedings of SPIE (November 05 2020)
Optical design of a variable beam angle fiber light source
Proceedings of SPIE (September 12 2021)
LED downlights with non-circular spots
Proceedings of SPIE (September 14 2005)
Development of zoom lenses for camera and technical topics ...
Proceedings of SPIE (September 21 1998)
TIR lenses for fluorescent lamps
Proceedings of SPIE (August 21 1995)

Back to Top