Paper
16 November 2010 Effect of process variables on the crack in laser cladded Ni-alloy on ductile cast iron
Qindong Li, Jichang Liu
Author Affiliations +
Abstract
Laser cladding was performed on the ductile cast iron substrate with Ni-base alloy under different process conditions. The cracks were observed. The temperature field and stress field in laser cladding under different process conditions were simulated with ANSYS finite element software. It was found that cracks were influenced by process variables. In certain ranges of laser power and scanning speed, while the other process parameters remain constant, the numbers of cracks increase with laser power increasing. Similarly the number of cracks increases with scanning velocity increasing while the other process parameters remain constant. In comparison with experimental results, the simulation with ANSYS finite element software could help to predict, to some extent, the crack of laser cladded Ni-alloy on ductile cast iron.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qindong Li and Jichang Liu "Effect of process variables on the crack in laser cladded Ni-alloy on ductile cast iron", Proc. SPIE 7843, High-Power Lasers and Applications V, 78430X (16 November 2010); https://doi.org/10.1117/12.871365
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Iron

Optical simulations

3D modeling

Computer simulations

Laser processing

Numerical simulations

Back to Top