Paper
11 November 2010 Error analysis of strain measurement induced by operating temperature of uncooled CCD
Jiazhi Pang, Qinwei Ma, Shaopeng Ma, Hongtao Wang
Author Affiliations +
Abstract
This paper focuses on the effect of operating temperature of uncooled CCD on the strain measurement error when the CCD is used to measure strain in an optical extensometer. A special experiment is designed in which an optical extensometer is used to measure the strain and a thermocouple is used to measure the temperature of CCD. The results show that the measured temperature of CCD has a similar tendency with the change of the measured strain. For different types of uncooled CCD, the temperature varies about 5~10 degree from the beginning of the experiment to the end, and the error of the measured strain induced by the temperature was about 120~180με. It is considered that the error is related to the inherent noise of the electronic components of the CCD whose operating mode is sensitive to the temperature change. When using the optical extensometer, it is suggested to preheat the CCD 1~2 hours before the experiment especially in doing high accuracy measurement. Otherwise, the strain induced by the operating temperature should be eliminated from the measurement results through conducting temperature compensation method mentioned in this paper.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiazhi Pang, Qinwei Ma, Shaopeng Ma, and Hongtao Wang "Error analysis of strain measurement induced by operating temperature of uncooled CCD", Proc. SPIE 7855, Optical Metrology and Inspection for Industrial Applications, 785509 (11 November 2010); https://doi.org/10.1117/12.871331
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Charge-coupled devices

Temperature metrology

CCD cameras

CCD image sensors

Image processing

Electronic components

Error analysis

RELATED CONTENT

Estimation of measuring position errors with CCD camera
Proceedings of SPIE (August 12 1992)
High speed CCD image processing at 75 MSPS and 10...
Proceedings of SPIE (October 11 1993)
CCD technology applied to laser cladding
Proceedings of SPIE (March 25 1996)
Multisensor system self-calibration
Proceedings of SPIE (September 13 1995)

Back to Top