Paper
15 April 2011 Development of hard-mask resist materials in nanoimprint lithography
Satoshi Takei, Tsuyoshi Ogawa
Author Affiliations +
Abstract
Hard mask resist material on photoreactive underlayer material was investigated to modify the film surface chemical adhesion between resist material and photoreactive underlayer material during ultraviolet irradiation of nanoimprint lithography. This procedure is proven to be suitable for resist material design and the process conditions of ultraviolet curing nanoimprint lithography for the reduction of defect numbers by template contamination when the template was removed from the hard mask resist after ultraviolet irradiation. The developed hard mask type silicon resist material with ultraviolet crosslinking epoxy groups produced high resolutions (80 nm) at a good aspect ratio, and excellent patterning dimensional accuracy by the replication (number of cycles: 32). The newly resist material and the process conditions are expected as one of the defect less nanoimprint lithographic technologies in next generation electronic devices.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Satoshi Takei and Tsuyoshi Ogawa "Development of hard-mask resist materials in nanoimprint lithography", Proc. SPIE 7972, Advances in Resist Materials and Processing Technology XXVIII, 79722C (15 April 2011); https://doi.org/10.1117/12.881495
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Ultraviolet radiation

Nanoimprint lithography

Fluorine

Silicon

Lithography

Photoresist processing

RELATED CONTENT


Back to Top