Simulation and control system of a power harvesting device for railroad track health monitoring

Kyle J. Phillips; Carl A. Nelson; Mahmood Fateh

doi:10.1117/12.880604

31 March 2011 Simulation and control system of a power harvesting device for railroad track health monitoring

Kyle J. Phillips, Carl A. Nelson, Mahmood Fateh

Proceedings Volume 7984, Health Monitoring of Structural and Biological Systems 2011; 79840D (2011) https://doi.org/10.1117/12.880604
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2011, San Diego, California, United States

Abstract

With the vastness of existing railroad infrastructure, there exist numerous road crossings which are lacking warning light systems and/or crossing gates due to their remoteness from existing electrical infrastructure. Along with lacking warning light systems, these areas also tend to lack distributed sensor networks used for railroad track health monitoring applications. With the power consumption required by these systems being minimal, extending electrical infrastructure into these areas would not be an economical use of resources. This motivated the development of an energy harvesting solution for remote railroad deployment. This paper describes a computer simulation created to validate experimental on-track results for different mechanical prototypes designed for harvesting mechanical power from passing railcar traffic. Using the Winkler model for beam deflection as its basis, the simulation determines the maximum power potential for each type of prototype for various railcar loads and speeds. Along with calculating the maximum power potential of a single device, the simulation also calculates the optimal number and position of the devices needed to power a standard railroad crossing light signal. A control system was also designed to regulate power to a battery, monitor and record power production, and make adjustments to the duty cycle of the crossing lights accordingly. On-track test results are compared and contrasted with results from the simulation, discrepancies between the two are examined and explained, and conclusions are drawn regarding suitability of the device for powering high-efficiency LED lights at railroad crossings and powering track-health sensor networks.

Citation Download Citation

Kyle J. Phillips, Carl A. Nelson, and Mahmood Fateh "Simulation and control system of a power harvesting device for railroad track health monitoring", Proc. SPIE 7984, Health Monitoring of Structural and Biological Systems 2011, 79840D (31 March 2011); https://doi.org/10.1117/12.880604

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available