Nanofabrication using heated probe tips

Jonathan R. Felts; Patrick C. Fletcher; Suhas Somnath; James Pikul; Zhenting Dai; Woo Kyung Lee; Paul E. Sheehan; William P. King

doi:10.1117/12.883992

13 May 2011 Nanofabrication using heated probe tips

Jonathan R. Felts, Patrick C. Fletcher, Suhas Somnath, James Pikul, Zhenting Dai, Woo Kyung Lee, Paul E. Sheehan, William P. King

Author Affiliations +

Proceedings Volume 8031, Micro- and Nanotechnology Sensors, Systems, and Applications III; 803105 (2011) https://doi.org/10.1117/12.883992
Event: SPIE Defense, Security, and Sensing, 2011, Orlando, Florida, United States

Abstract

We present progress towards scalable, high precision nanofabrication in a variety of materials using heated Atomic Force Microscope (AFM) probes. Temperature control of a heated AFM tip allows nanometer scale thermochemical patterning, deposition of thermoplastic polymers, and surface melting. The challenges that must be overcome to scale such a technology to industrial-scale manufacturing include tip wear, thermal and mechanical control of the cantilever, chemical reaction control at the tip-surface interface, and fabrication throughput. To mitigate tip wear, we have integrated nanocrystalline diamond films onto our heated AFM probe tip. Such diamond tips are extremely resistant to wear and fouling at a self-heating temperature of 400 C and load force of 200 nN over long distances. To improve cantilever temperature control, a closed loop feedback control was designed to allow for 0.2 C precision temperature control during nanolithography. Electrohydrodynamic jetting controls the deposition of polyethylene onto a heated probe tip. Finally, to address throughput, we have fabricated cantilever arrays having independent temperature control and integrated them into a commercial AFM system. We show these advances by patterning thousands of nanostructures of polyethylene and poly(3-dodecylthiophene), with cumulative length more than 2 mm and patterning accuracy better than 50 nm.

Citation Download Citation

Jonathan R. Felts, Patrick C. Fletcher, Suhas Somnath, James Pikul, Zhenting Dai, Woo Kyung Lee, Paul E. Sheehan, and William P. King "Nanofabrication using heated probe tips", Proc. SPIE 8031, Micro- and Nanotechnology Sensors, Systems, and Applications III, 803105 (13 May 2011); https://doi.org/10.1117/12.883992

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available