The alignment of the aerospace Cassegrain telescope primary mirror and iso-static mount by using CMM

Wei-Cheng Lin; Shenq-Tsong Chang; Yu-Chuan Lin; Yu-Cheng Cheng; Ming-Ying Hsu; Ting-Ming Huang

doi:10.1117/12.894379

12 September 2011 The alignment of the aerospace Cassegrain telescope primary mirror and iso-static mount by using CMM

Wei-Cheng Lin, Shenq-Tsong Chang, Yu-Chuan Lin, Yu-Cheng Cheng, Ming-Ying Hsu, Ting-Ming Huang

Proceedings Volume 8131, Optical System Alignment, Tolerancing, and Verification V; 81310M (2011) https://doi.org/10.1117/12.894379
Event: SPIE Optical Engineering + Applications, 2011, San Diego, California, United States

Abstract

In order to meet both optical performance and structural stiffness requirements of the aerospace Cassegrain telescope, the primary mirror shall be mounted with the main plate by iso-static mount. This article describes of the alignment of the aerospace Cassegrain telescope's primary mirror and iso-static mount by using coordinate-measuring machine (CMM), and the design and assembly of mechanical ground support equipment (MGSE). The primary mirror adjusting MGSE consists of three 3-axis linear stages and point contact platforms, which hold the mirror while avoid the rotated movement when adjusting the stage. This MGSE provide the adjustment of tilt and height for the mirror. After the CMM measurement, the coordinates of measured point on the mirror will be analyzed by the software based on least square fitting to find the radius of curvature, conic constant, de-center and tilt, etc. According to these results, the mirror posture will be adjusted to reduce de-center and tilt by the designed MGSE. The tilt in x and y direction are reduced within 0.001 degrees and the distance deviation from the best fitted profile of the mirror to the main plate shall be less than 0.008mm.

Citation Download Citation

Wei-Cheng Lin, Shenq-Tsong Chang, Yu-Chuan Lin, Yu-Cheng Cheng, Ming-Ying Hsu, and Ting-Ming Huang "The alignment of the aerospace Cassegrain telescope primary mirror and iso-static mount by using CMM", Proc. SPIE 8131, Optical System Alignment, Tolerancing, and Verification V, 81310M (12 September 2011); https://doi.org/10.1117/12.894379

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available