Paper
3 April 2012 Characterization of longitudinal tensile force of millimeter thick IPMCs
Viljar Palmre, David Pugal, Kwang Kim
Author Affiliations +
Abstract
Ionic polymer-metal composites (IPMCs) are an emerging class of electroactive polymers that display both actuating and sensing capabilities. In this study, a longitudinal tensile force performance of millimeter thick IPMCs was investigated. Both, 0.5 mm and 1 mm thick IPMCs with Pt electrodes were tested in tensile mode, by monitoring the change of tensile load in response to applied electric fields. The measurements were performed either under static pre-strain conditions or by dynamically increasing the tensile strain with constant rate, while switching the voltage on and off periodically. The measurements under pre-load and constant voltage were performed in order to evaluate the maximum tensile force of the samples. Our results demonstrate that Pt-IPMCs which show the blocking force in bending direction in range of 50 mN, are capable of generating tensile forces in longitudinal direction more than 1.5 N at an applied voltage of 3 V DC.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Viljar Palmre, David Pugal, and Kwang Kim "Characterization of longitudinal tensile force of millimeter thick IPMCs", Proc. SPIE 8340, Electroactive Polymer Actuators and Devices (EAPAD) 2012, 83402L (3 April 2012); https://doi.org/10.1117/12.915925
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Platinum

Polymers

Actuators

Electroactive polymers

Metals

Gold

Back to Top