Generation of an astronomical optical frequency comb in three fibre-based nonlinear stages

J. M. Chavez Boggio; A. A. Rieznik; M. Zajnulina; M. Böhm; D. Bodenmüller; M. Wysmolek; H. Sayinc; Jörg Neumann; Dietmar Kracht; R. Haynes; M. M. Roth

doi:10.1117/12.922538

10 May 2012 Generation of an astronomical optical frequency comb in three fibre-based nonlinear stages

J. M. Chavez Boggio, A. A. Rieznik, M. Zajnulina, M. Böhm, D. Bodenmüller, M. Wysmolek, H. Sayinc, Jörg Neumann, Dietmar Kracht, R. Haynes, M. M. Roth

Author Affiliations +

Proceedings Volume 8434, Nonlinear Optics and Applications VI; 84340Y (2012) https://doi.org/10.1117/12.922538
Event: SPIE Photonics Europe, 2012, Brussels, Belgium

Abstract

The generation of a broadband optical frequency comb with 80 GHz spacing by propagation of a sinusoidal wave through three dispersion-optimized nonlinear stages is numerically investigated. The input power, the dispersion, the nonlinear coefficient, and lengths are optimized for the first two stages for the generation of low-noise ultra-short pulses. The final stage is a low-dispersion highly-nonlinear fibre where the ultra-short pulses undergo self-phase modulation for strong spectral broadening. The modeling is performed using a Generalized Nonlinear Schrodinger Equation incorporating Kerr and Raman nonlinearities, self-steepening, high-order dispersion and gain. In the proposed approach the sinusoidal input field is pre-compressed in the first fibre section. This is shown to be necessary to keep the soliton order below ten to minimize the noise build-up during adiabatic pulse compression, when the pulses are subsequently amplified in the next fibre section (rare-earth-doped-fibre with anomalous dispersion). We demonstrate that there is an optimum balance between dispersion, input power and nonlinearities, in order to have adiabatic pulse compression. It is shown that the intensity noise grows exponentially as the pulses start to be compressed in the amplifying fibre. Eventually, the noise decreases and reaches a minimum when the pulses are maximally compressed. A train of 70 fs pulses with up to 3.45 kW peak power and negligible noise is generated in our simulations, which can be spectrally broadened in a highly-nonlinear fibre. The main drawback of this compression technique is the small fibre length tolerance where noise is negligible (smaller than 10 cm for erbium-doped fibre length of 15 m). We finally investigate how the frequency comb characteristics are modified by incorporating an optical feedback. We show that frequency combs appropriate for calibration of astronomical spectrographs can be improved by using this technique.

Citation Download Citation

J. M. Chavez Boggio, A. A. Rieznik, M. Zajnulina, M. Böhm, D. Bodenmüller, M. Wysmolek, H. Sayinc, Jörg Neumann, Dietmar Kracht, R. Haynes, and M. M. Roth "Generation of an astronomical optical frequency comb in three fibre-based nonlinear stages", Proc. SPIE 8434, Nonlinear Optics and Applications VI, 84340Y (10 May 2012); https://doi.org/10.1117/12.922538

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available