Empirical formula for rates of hot pixel defects based on pixel size, sensor area, and ISO

Glenn H. Chapman; Rohit Thomas; Zahava Koren; Israel Koren

doi:10.1117/12.2005850

19 February 2013 Empirical formula for rates of hot pixel defects based on pixel size, sensor area, and ISO

Glenn H. Chapman, Rohit Thomas, Zahava Koren, Israel Koren

Proceedings Volume 8659, Sensors, Cameras, and Systems for Industrial and Scientific Applications XIV; 86590C (2013) https://doi.org/10.1117/12.2005850
Event: IS&T/SPIE Electronic Imaging, 2013, Burlingame, California, United States

Abstract

Experimentally, image sensors measurements show a continuous development of in-field permanent hot pixel defects increasing in numbers over time. In our tests we accumulated data on defects in cameras ranging from large area (<300 sq mm) DSLR’s, medium sized (~40 sq mm) point and shoot, and small (20 sq mm) cell phone cameras. The results show that the rate of defects depends on the technology (APS or CCD), and on design parameters like imager area, pixel size (from 1.5 to 7 um), and gain (from ISO100 to 1600). Comparing different sensor sizes with similar pixel sizes has shown that defect rates scale linearly with sensor area, suggesting the metric of defects/year/sq mm, which we call defect density. A search was made to model this defect density as a function of the two parameters pixel size and ISO. The best empirical fit was obtained by a power law curve. For CCD imagers, the defect densities are proportional to the pixel size to the power of -2.25 times the ISO to the power of 0.69. For APS (CMOS) sensors the power law had the defect densities proportional to the pixel size to the power of -3.07 times the ISO raised to the power of 0.5. Extending our empirical formula to include ISO allows us to predict the expected defect development rate for a wide set of sensor parameters.

Citation Download Citation

Glenn H. Chapman, Rohit Thomas, Zahava Koren, and Israel Koren "Empirical formula for rates of hot pixel defects based on pixel size, sensor area, and ISO", Proc. SPIE 8659, Sensors, Cameras, and Systems for Industrial and Scientific Applications XIV, 86590C (19 February 2013); https://doi.org/10.1117/12.2005850

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available