Paper
15 October 2013 Fiber optic three-component seismometer
Dongshan Jiang, Wentao Zhang, Fang Li
Author Affiliations +
Proceedings Volume 8924, Fourth Asia Pacific Optical Sensors Conference; 89240G (2013) https://doi.org/10.1117/12.2029170
Event: Asia Pacific Optical Sensors Conference 2013, 2013, Wuhan, China
Abstract
Three-component seismometer is widely used in oil or gas exploration, earth quake monitoring. In this paper, an allmetal 3-component optical fiber seismometer is proposed and experimentally demonstrated. The theoretical analysis is given based on electro-mechanical theory. Calibration results show that axis sensitivity is 41 dB (re: 0 dB=1 rad/g) with a fluctuation ±2 dB in frequency bandwidth of 5~400 Hz. A transverse sensitivity of about -40 dB is achieved. The fluctuation of the acceleration sensitivity for the three accelerometers in the seismometer is within ±2.5 dB. The minimum phase demodulation detection accuracy of the phase-generated carrier (PGC) is 10-5 rad/√Hz, and the minimum detectable acceleration is calculated to be 90 ng/√Hz. With an all-metal structure, the proposed seismometer is expected to improve reliability of long-term use in harsh environment such as ocean bottom seismic wave monitoring in oil or gas exploration.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dongshan Jiang, Wentao Zhang, and Fang Li "Fiber optic three-component seismometer", Proc. SPIE 8924, Fourth Asia Pacific Optical Sensors Conference, 89240G (15 October 2013); https://doi.org/10.1117/12.2029170
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Metals

Analog electronics

Bridges

Fiber optics

Reliability

Demodulation

RELATED CONTENT

Cyclic fatigue behavior of silica fiber
Proceedings of SPIE (February 01 1991)
Fiber optic calorimeter
Proceedings of SPIE (September 23 1998)
Reliability in fiber optical sensor applications
Proceedings of SPIE (April 30 2003)

Back to Top