Paper
31 January 2014 Quantum cascade laser-based sensor system for hydrogen peroxide detection
Wei Ren, Wenzhe Jiang, Nancy Sanchez, Pietro Patimisco, Vincenzo Spagnolo, Chung-en Zah, Feng Xie, Lawrence C. Hughes Jr., Robert J. Griffin, Frank K. Tittel
Author Affiliations +
Abstract
A quartz-enhanced photoacoustic spectroscopy (QEPAS) sensor system was developed for the sensitive detection of hydrogen peroxide (H2O2) using its absorption transitions in the v6 fundamental band near 7.73 μm. The recent availability of distributed-feedback quantum cascade lasers (DFB-QCLs) provides convenient access to a strong H2O2 absorption line located at 1295.55 cm-1. Sensor calibration was performed by means of a water bubbler that generated titrated average vapor concentrations. A minimum detection limit of 75 parts per billion (ppb) was achieved at a pressure of 80 torr for a 1 sec data acquisition time. The long-term repeatability and stability of the sensor was investigated by measuring time-varying H2O2 mixtures for ~2 hrs. An Allan deviation analysis was performed to investigate the long-term performance of the QEPAS sensor system, indicating the feasibility of a minimum detection limit of 12 ppb using the optimum data averaging time of 100 sec.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Ren, Wenzhe Jiang, Nancy Sanchez, Pietro Patimisco, Vincenzo Spagnolo, Chung-en Zah, Feng Xie, Lawrence C. Hughes Jr., Robert J. Griffin, and Frank K. Tittel "Quantum cascade laser-based sensor system for hydrogen peroxide detection", Proc. SPIE 8993, Quantum Sensing and Nanophotonic Devices XI, 89931X (31 January 2014); https://doi.org/10.1117/12.2039557
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Quantum cascade lasers

Absorption

Hydrogen

Modulation

Calibration

Photoacoustic spectroscopy

Back to Top