Method for measuring the intensity profile of a CT fan-beam filter

Bruce R. Whiting; Andreea Dohatcu

doi:10.1117/12.2043246

19 March 2014 Method for measuring the intensity profile of a CT fan-beam filter

Bruce R. Whiting, Andreea Dohatcu

Proceedings Volume 9033, Medical Imaging 2014: Physics of Medical Imaging; 903322 (2014) https://doi.org/10.1117/12.2043246
Event: SPIE Medical Imaging, 2014, San Diego, California, United States

Abstract

Research on CT systems often requires knowledge of intensity as a function of angle in the fan-beam, due to the presence of bowtie filters, for studies such as dose reduction simulation, Monte Carlo dose calculations, or statistical reconstruction algorithms. Since manufacturers consider the x-ray bowtie filter design to be proprietary information, several methods have been proposed to measure the beam intensity profile independently: 1) calculate statistical properties of noise in acquired sinograms (requires access to raw data files, which is also vendor proprietary); 2) measure the waveform of a dosimeter located away from the isocenter (requires dosimeter equipment costing > $10K). We present a novel method that is inexpensive (parts costing ~$100 from any hardware store, using Gafchromic film at ~$3 per measurement), requires no proprietary information, and can be performed in a few minutes. A fixture is built from perforated steel tubing, which forms an aperture that selectively samples the intensity at a particular fan-beam angle in a rotating gantry. Two exposures (1× and 2×) are made and self-developing radiochromic film (Gafchromic XR- Ashland Inc.) is then scanned on an inexpensive PC document scanner. An analysis method is described that linearizes the measurements for relative exposure. The resultant profile is corrected for geometric effects (1/LΛ2 fall-off, gantry dwell time) and background exposure, providing a noninvasive estimate of the CT fan-beam intensity present in an operational CT system. This method will allow researchers to conveniently measure parameters required for modeling the effects of bowtie filters in clinical scanners.

Citation Download Citation

Bruce R. Whiting and Andreea Dohatcu "Method for measuring the intensity profile of a CT fan-beam filter", Proc. SPIE 9033, Medical Imaging 2014: Physics of Medical Imaging, 903322 (19 March 2014); https://doi.org/10.1117/12.2043246

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available