Paper
20 December 2013 Highly birefringence low loss index guiding photonic crystal fiber with differently sized air-holes in cladding
Author Affiliations +
Proceedings Volume 9044, 2013 International Conference on Optical Instruments and Technology: Optical Sensors and Applications; 904409 (2013) https://doi.org/10.1117/12.2036252
Event: International Conference on Optical Instruments and Technology (OIT2013), 2013, Beijing, China
Abstract
An analysis of highly birefringence low losss index-guiding phptonic crystal fiber composed of different sized circular air-holes in cladding and adjacent to the two ellipital air-holes x-diraction in the first inner rings is carried out in this work using voul fector finite element method.The birefringence properities in terms of various parameters,e.g,pitch length,air-hole size and ellipticity ratio are calculated.Form the numerical results confirm that the size control of these air holes and pitch length is the key to reaching high model birefringnce.The proposed struture at wavelength 1.55μm shows a birefringence of up to 3.02x10-2 and at the same time can get the confinement loss of less than 1.9x10-7dB/m, which is a reference significance in useful to dessign temperature sensors.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Musideke Mayilamu, Ying Lu, Congjing Hao, Liangcheng Duan, and Jianquan Yao "Highly birefringence low loss index guiding photonic crystal fiber with differently sized air-holes in cladding", Proc. SPIE 9044, 2013 International Conference on Optical Instruments and Technology: Optical Sensors and Applications, 904409 (20 December 2013); https://doi.org/10.1117/12.2036252
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Birefringence

Photonic crystal fibers

Cladding

Finite element methods

Refractive index

Silica

Temperature sensors

Back to Top