Layout pattern-driven design rule evaluation

Yasmine Badr; Ko-wei Ma; Puneet Gupta

doi:10.1117/12.2046140

28 March 2014 Layout pattern-driven design rule evaluation

Yasmine Badr, Ko-wei Ma, Puneet Gupta

Proceedings Volume 9053, Design-Process-Technology Co-optimization for Manufacturability VIII; 905307 (2014) https://doi.org/10.1117/12.2046140
Event: SPIE Advanced Lithography, 2014, San Jose, California, United States

Abstract

With the use of sub-wavelength photolithography, some layouts can have low printability and, accordingly, low yield due to the existence of bad patterns, even though they pass design rule checks. A reasonable approach is to select some of the candidate bad patterns as “forbidden”. With the use of sub-wavelength photolithography, some layouts can have low printability and, accordingly, low yield due to the existence of bad patterns, even though they pass design rule checks. A reasonable approach is to select some of the candidate bad patterns as forbidden". These are the ones with high yield-impact or low routability-impact, and these are to be prohibited in the design phase. The rest of the candidate bad patterns may be fixed in the post-route stage, in a best-effort manner. The process developers need to optimize the process to be friendly to the patterns of high routability-impact. Hence, an evaluation method is required early in the process, to assess the impact of forbidding layout patterns on routability. In this work, we propose Pattern-driven Design Rule Evaluation (Pattern-DRE), which can be used to evaluate the importance of patterns for the routability of the standard cells and, accordingly, select the set of bad patterns to forbid in the design. The framework can also be used to compare restrictive patterning technologies (e.g. LELE, SADP, SAQP, SAOP). Given a set of design rules and a set of forbidden patterns, Pattern-DRE generates a set of virtual standard cells, then it finds the possible routing options for each cell, without using any of the forbidden patterns. Finally, it reports the routability metrics. We present few studies that illustrate the use cases of the framework. The first study compares LELE to SADP, by using a set of forbidden patterns that are allowed by LELE but not by SADP. The second study investigates the area penalty as well as the SADP-compliance that we obtain if we increase the minimum gate-to-Local-Interconnect spacing design rule.

Citation Download Citation

Yasmine Badr, Ko-wei Ma, and Puneet Gupta "Layout pattern-driven design rule evaluation", Proc. SPIE 9053, Design-Process-Technology Co-optimization for Manufacturability VIII, 905307 (28 March 2014); https://doi.org/10.1117/12.2046140

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available