Modeling and analysis of ductility of brittle materials using indentation method

Guoyan Sun; Zhe Lu; Jianming Bai; Fangsu Yu

doi:10.1117/12.2069591

6 August 2014 Modeling and analysis of ductility of brittle materials using indentation method

Guoyan Sun, Zhe Lu, Jianming Bai, Fangsu Yu

Proceedings Volume 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 928122 (2014) https://doi.org/10.1117/12.2069591
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China

Abstract

Nowadays, many optical elements are fabricated by means of glass molding using hard and brittle inserts such as Silicon Carbide (SiC) and Silicon Nitride (Si₃N₄). However, for those hard-to-machine materials, the most feasible solution is still with ultra-precision grinding and following polishing. Hence, it is necessary and meaningful to study their plastic properties for the development of optical fabrication and ultra-precision manufacturing process. However, the conventional methods including compression test and indentation fracture mechanics are not sufficient to obtain the accurate parameters and still lack of reliable supporting of the machining process. To solve this problem, this paper presents a novel way to correlate the plastic properties to the indentation data using dimensional analysis for the two sorts of hard and brittle materials of SiC and Si₃N₄. Through integrating the data obtained by the indentation tests and the modeling method presented in this paper, stress-strain behavior, yield stress σ_y, yield strain epsilon_y and strain hardening exponent n could be determined. The processing performance of these two materials reflected by the above parameters are consistent with the conclusions drawing from the indentation crack development under varying loads during the indentation test, which verifies the effectiveness and feasibility of the presented modeling method.

Citation Download Citation

Guoyan Sun, Zhe Lu, Jianming Bai, and Fangsu Yu "Modeling and analysis of ductility of brittle materials using indentation method", Proc. SPIE 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 928122 (6 August 2014); https://doi.org/10.1117/12.2069591

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Silicon carbide

Ceramics

Metals

Optics manufacturing

Silicon

Data modeling

Diamond

Show All Keywords

Keywords/Phrases

Search In:

Publication Years