Paper
16 August 1988 In-Situ MBE Regrowth of Ion Beam Etched GaAs/A1GaAs Heterostructures
A. Scherer, J. P . Harbison, D. M. Hwang, E. D . Beebe
Author Affiliations +
Proceedings Volume 0945, Advanced Processing of Semiconductor Devices II; (1988) https://doi.org/10.1117/12.947390
Event: Advances in Semiconductors and Superconductors: Physics and Device Applications, 1988, Newport Beach, CA, United States
Abstract
We report for the first time the use of ion beam assisted etching in the lOad-lock of a molecular beam epitaxy (MBE) chamber for in-situ patterning and regrowth of GaAs/AlGaAs microstructures. Microstructural analysis with electron microscopy indicates that the quality of the overgrowth improves dramatically as the substrate temperature for regrowth is raised from 580 C to 680 C. Using ion beam assisted etching in conjunction with fluoride masks compatible both with the electron beam lithography process and the need for low reactivity with GaAs at elevated growth temperatures, epitaxical single-crystal AlGaAs layers have been regrown on sub-micron structures.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Scherer, J. P . Harbison, D. M. Hwang, and E. D . Beebe "In-Situ MBE Regrowth of Ion Beam Etched GaAs/A1GaAs Heterostructures", Proc. SPIE 0945, Advanced Processing of Semiconductor Devices II, (16 August 1988); https://doi.org/10.1117/12.947390
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Ions

Gallium arsenide

Ion beams

Transmission electron microscopy

Photomasks

Electron beam lithography

RELATED CONTENT

Microfabrication below 10 nm
Proceedings of SPIE (October 01 1990)
Ion etching of ultranarrow structures
Proceedings of SPIE (October 01 1990)
Etched Mirror Corner Bend For Semiconductor Optical Circuits.
Proceedings of SPIE (November 03 1986)

Back to Top