Optical measurement of materials and lens assemblies at specific or varied temperatures

John J. Nemechek

doi:10.1117/12.2197598

12 October 2015 Optical measurement of materials and lens assemblies at specific or varied temperatures

John J. Nemechek

Proceedings Volume 9633, Optifab 2015; 96331S (2015) https://doi.org/10.1117/12.2197598
Event: SPIE Optifab, 2015, Rochester, New York, United States

Abstract

Optical materials and lens assemblies are specified for use at various operating temperatures. Ophthalmic lenses such as intra-ocular (IOLs), rigid gas permeable (RGP), and soft contact lenses must be verified at a single well-controlled temperature to ensure correct performance. In comparison, lens assemblies for UAVs (unmanned aerial vehicles) and other “outdoor” applications demand performance over a substantial range of temperatures. Both applications demand the ability to integrate temperature monitoring or control with optical measuring instruments. A common practice is to thermally soak the material or lens assembly and then attempt measurement before the object under evaluation returns to ambient room temperature. We are reporting on the utilization of a NIST-traceable temperature device combined with wavefront sensing technology for faster integrated measurement capability. The temperature sensor is currently capable of 0.01 and 0.1 degree C resolution and accuracy; respectively for an operating range of 0 to 100 degrees C. Efforts are underway to extend the temperature measurement range down to -30 C. The wavefront measurement device is a Shack- Hartmann sensor (SHS) operating at 5 to 15 Hz with simultaneous gauging of temperature. The SHS can be operated with a choice of wavelengths from 400 to 1,000 nm. It also supports both single and double-pass configurations. The single-pass arrangement was chosen for these experiments due to the simpler, more compact set-up. The dynamic range of the wavefront sensor is first utilized to evaluate the temperature chamber. Results are then presented for two lens assemblies intended for commercial UAVs.

Citation Download Citation

John J. Nemechek "Optical measurement of materials and lens assemblies at specific or varied temperatures", Proc. SPIE 9633, Optifab 2015, 96331S (12 October 2015); https://doi.org/10.1117/12.2197598

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
5 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Wavefronts

Temperature metrology

Photovoltaics

Unmanned aerial vehicles

Wavefront sensors

Optical testing

Aluminum

Show All Keywords

Keywords/Phrases

Search In:

Publication Years