Paper
5 November 2015 Feedback circuit design of an auto-gating power supply for low-light-level image intensifier
Ye Yang, Bo Yan, Qiang Zhi, Xiao-bing Ni, Jun-guo Li, Yu Wang, Ze Yao
Author Affiliations +
Proceedings Volume 9795, Selected Papers of the Photoelectronic Technology Committee Conferences held June–July 2015; 97950B (2015) https://doi.org/10.1117/12.2208255
Event: Selected Proceedings of the Photoelectronic Technology Committee Conferences held June-July 2015, 2015, Hefei, Suzhou, and Harbin, China
Abstract
This paper introduces the basic principle of auto-gating power supply which using a hybrid automatic brightness control scheme. By the analysis of current as image intensifier to special requirements of auto-gating power supply, a feedback circuit of the auto-gating power supply is analyzed. Find out the reason of the screen flash after the auto-gating power supply assembled image intensifier. This paper designed a feedback circuit which can shorten the response time of auto-gating power supply and improve screen slight flicker phenomenon which the human eye can distinguish under the high intensity of illumination.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ye Yang, Bo Yan, Qiang Zhi, Xiao-bing Ni, Jun-guo Li, Yu Wang, and Ze Yao "Feedback circuit design of an auto-gating power supply for low-light-level image intensifier", Proc. SPIE 9795, Selected Papers of the Photoelectronic Technology Committee Conferences held June–July 2015, 97950B (5 November 2015); https://doi.org/10.1117/12.2208255
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Power supplies

Image intensifiers

Microchannel plates

Eye

Amplifiers

Capacitors

Automatic control

RELATED CONTENT


Back to Top