Precuring implant photoresists for shrink and patterning control

Gustaf Winroth; Erik Rosseel; Christie Delvaux; Efrain A. Sanchez; Monique Ercken

doi:10.1117/1.JMM.12.4.041303

5 September 2013 Precuring implant photoresists for shrink and patterning control

Gustaf Winroth, Erik Rosseel, Christie Delvaux, Efrain A. Sanchez, Monique Ercken

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 12, Issue 4, 041303 (September 2013). https://doi.org/10.1117/1.JMM.12.4.041303

Abstract

193-nm compatible photoresists are turning out to be the new platform for implant lithography, due to the increasing requirements in both resolution and overlay. Shrinkage of such resists is becoming progressively the most topical issue for aggressive nodes, where conventional pretreatments from older resist platforms, such as ultraviolet flood exposures, are not directly transferable to (meth-)acrylate-type resists. The precuring options available for state-of-the-art implant photoresists for 193-nm lithography is explored, in which we target to reduce the shrinkage during implantation for trenching critical dimensions (CDs) that are relevant for nodes <;20 nm . An extensive study comprising different approaches, including laser-, ion-, and electron-based treatments, is presented. Each treatment is individually investigated with the aim to find not only a valid pretreatment for shrinkage control during implantation, but also to understand what effect alternative pretreatments have on the morphology and the CDs of thick photoresists used as implant stopping layers. Viable options for further process optimization in order to integrate them into device process flows are found. To this extent, the shrink behavior after pretreatment is shown, and the additional shrink dynamics after implantation are compared.

Citation Download Citation

Gustaf Winroth, Erik Rosseel, Christie Delvaux, Efrain A. Sanchez, and Monique Ercken "Precuring implant photoresists for shrink and patterning control," Journal of Micro/Nanolithography, MEMS, and MOEMS 12(4), 041303 (5 September 2013). https://doi.org/10.1117/1.JMM.12.4.041303

Published: 5 September 2013

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE