1 June 1995 In-line fiber optic polarimeter with a 99% coupler
Bernhard Scholl, Thomas Stein, Arndt Neues, Konrad Mertens
Author Affiliations +
Abstract
A polarization transformer in combination with a polarization analyzer is well suited for the generation of any wanted polarization state. We describe the setup, calibration, and applications of an in-line fiber optic polarization detector (IPD) built with a fiber optic coupler of 99% coupling ratio. At the low power output port we use standard beamsplitters and polarizers to generate four different polarization dependent signals. For calibration, the polarization is measured at the high-power output port with an oft-line polarimeter (OPD). This enables the determination of the system matrix, which represents the relation between the polarization at the high-power port and the four signals at the low-power port. With this system matrix, a continuous and accurate determination of the polarization at the high-power output port is possible.
Bernhard Scholl, Thomas Stein, Arndt Neues, and Konrad Mertens "In-line fiber optic polarimeter with a 99% coupler," Optical Engineering 34(6), (1 June 1995). https://doi.org/10.1117/12.202088
Published: 1 June 1995
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications and 5 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Fiber optics

Calibration

Beam splitters

Polarimetry

Polarizers

Sensors

RELATED CONTENT

Confocal scanning Mueller polarimeter
Proceedings of SPIE (August 24 2009)
Modified transmission type four-detector polarimeter
Proceedings of SPIE (October 22 2004)
Initial results of a simultaneous Stokes imaging polarimeter
Proceedings of SPIE (September 13 2007)
In line fiber optic polarimeter using a fused 1x5 star...
Proceedings of SPIE (October 25 1996)
Polarimetry using liquid crystal variable retarders
Proceedings of SPIE (June 25 2004)

Back to Top