2 August 2013 Laser-induced damage of rugate and quarter-wave stacks high reflectors deposited by ion-beam sputtering
Zhao Qiao, Ping Ma, Hao Liu, Yunti Pu, Zhichao Liu
Author Affiliations +
Abstract
Rugate and high/low quarter-wave stacks high reflector coatings for 1064 nm have been prepared with Ta 2 O 5 and SiO 2 by an ion-beam sputtering technique. A laser-induced damage experiment of the samples has been conducted at 1064 nm with pulse duration of 5 ns [full width at half maximum (FWHM)]. These two samples’ damages both initiate at defects and show almost the same damage threshold within the experimental error. Nevertheless, the damage morphology on rugate is less severe at higher fluences. The thermal shock wave induced by a nanosecond pulsed laser is considered to be the main cause of catastrophic damage.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2013/$25.00 © 2013 SPIE
Zhao Qiao, Ping Ma, Hao Liu, Yunti Pu, and Zhichao Liu "Laser-induced damage of rugate and quarter-wave stacks high reflectors deposited by ion-beam sputtering," Optical Engineering 52(8), 086103 (2 August 2013). https://doi.org/10.1117/1.OE.52.8.086103
Published: 2 August 2013
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical coatings

Laser induced damage

Refractive index

Tantalum

Ion beams

Reflectors

Sputter deposition

Back to Top