22 January 2018 Fluorescence decay data analysis correcting for detector pulse pile-up at very high count rates
Matthias Patting, Paja Reisch, Marcus Sackrow, Rhys Dowler, Marcelle Koenig, Michael Wahl
Author Affiliations +
Abstract
Using time-correlated single photon counting for the purpose of fluorescence lifetime measurements is usually limited in speed due to pile-up. With modern instrumentation, this limitation can be lifted significantly, but some artifacts due to frequent merging of closely spaced detector pulses (detector pulse pile-up) remain an issue to be addressed. We propose a data analysis method correcting for this type of artifact and the resulting systematic errors. It physically models the photon losses due to detector pulse pile-up and incorporates the loss in the decay fit model employed to obtain fluorescence lifetimes and relative amplitudes of the decay components. Comparison of results with and without this correction shows a significant reduction of systematic errors at count rates approaching the excitation rate. This allows quantitatively accurate fluorescence lifetime imaging at very high frame rates.
© 2018 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2018/$25.00 © 2018 SPIE
Matthias Patting, Paja Reisch, Marcus Sackrow, Rhys Dowler, Marcelle Koenig, and Michael Wahl "Fluorescence decay data analysis correcting for detector pulse pile-up at very high count rates," Optical Engineering 57(3), 031305 (22 January 2018). https://doi.org/10.1117/1.OE.57.3.031305
Received: 2 October 2017; Accepted: 20 December 2017; Published: 22 January 2018
Lens.org Logo
CITATIONS
Cited by 16 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Luminescence

Fluorescence lifetime imaging

Data analysis

Error analysis

Photodetectors

Confocal microscopy

RELATED CONTENT


Back to Top