My research activity focuses on the study of photosensitive materials, mainly photopolymers and photochromic materials, for the application in volume phase holographic optical elements. The activity starts from the design of the material and goes to the realization of a proof of concept device. Vibrational spectroscopy (IR and Raman), UV visible spectroscopy and spectral reflectance are commonly used to characterize the new materials.
Moreover, I am involved in the design and manufacturing of dispersing elements for astronomical spectrographs belonging to the class of Volume Phase Holographic Gratings (VPHGs). A dedicated RGB holo lab is available for this taks.
I am also involved in the design of dielectric optical coatings for astronomical instrumentation operating in the optical and infrared spectral ranges.
Moreover, I am involved in the design and manufacturing of dispersing elements for astronomical spectrographs belonging to the class of Volume Phase Holographic Gratings (VPHGs). A dedicated RGB holo lab is available for this taks.
I am also involved in the design of dielectric optical coatings for astronomical instrumentation operating in the optical and infrared spectral ranges.
This will count as one of your downloads.
You will have access to both the presentation and article (if available).
SHARK-NIR is an instrument which provides direct imaging, coronagraphic imaging, dual band imaging and low resolution spectroscopy in Y, J and H bands, taking advantage of the outstanding performance of the Large Binocular Telescope AO systems. Binocular observations will be provided used in combination with SHARK-VIS (operating in V band) and LMIRCam of LBTI (operating from K to M bands), in a way to exploit coronagraphic simultaneous observations in three different wavelengths.
A wide variety of coronagraphic techniques have been implemented in SHARK-NIR, ranging from conventional ones such as the Gaussian Lyot, to others quite robust to misalignments such as the Shaped Pupil, to eventually techniques more demanding in term of stability during the observation, as the Four Quadrant; the latter is giving in theory and simulations outstanding contrast, and it is supported in term of stability by the SHARK-NIR internal fast tip-tilt loop and local NCPA correction, which should ensure the necessary stability allowing this technique to operate at its best.
The main science case is of course exoplanets search and characterization and young stellar systems, jets and disks characterization, although the LBT AO extreme performance, allowing to reach excellent correction even at very faint magnitudes, may open to science previously difficult to be achieved, as for example AGN and QSO morphological studies.
The institutes participating to the SHARK-NIR consortium which designed and built the instrument are Istituto Nazionale di Astro Fisica (INAF, Italy), the Max Planck Institute for Astronomy (MPIA, Heidelberg, Germany) and University of Arizona/Steward Observatory (UoA/SO, Tucson, Az, USA). We report here about the SHARK-NIR status, that should achieve first light at LBT before the end of 2022.
MORFEO, formerly known with the acronym MAORY, is the Multi-Conjugated Adaptive Optics (MCAO) module for the European Extremely Large Telescope (ELT). MORFEO is designed to feed the Near Infrared (NIR) camera MICADO with both MCAO and Single-Conjugated AO (SCAO) operation modes. The optical configuration provides a one to one imaging of the telescope focal surface on two ports (one feeding MICADO and the other dedicated to a future instrument) and it is equipped with two post-focal deformable mirrors together with the Laser Guide Star (LGS) and Natural Guide Star (NGS) channels for wavefront sensing and tomographic reconstruction.
In this paper, we present the status of the optical configuration at the completion of the Preliminary Design Review (PDR). We will focus our attention on the tolerance analysis of the elements, consisting in both manufacturing and alignment, to provide the expected performances of the instrument after initial integration. We will also present the outcomes of the stability analysis of the instrument, consisting in rigid-body motions and thermoelastic deformations of the structure and optomechanics, used to define the procedures and benchmark to maintain the instrument performances during operation. Details on the integrated modelling, specifically developed for this purpose, will be provided.
View contact details
No SPIE Account? Create one
