Surface form metrology for freeform optical components is a significant challenge that impacts the entire process chain. One of the main aims is that the metrology technique provides sufficiently low measurement uncertainty within a reasonable measurement time. We developed a non-contact, non-part-specific cascade optical coherence tomography (COCT) technique within this metrology context. C-OCT utilizes a primary and a secondary interferometer in a cascade that transforms a difficult-to-measure optical path difference (OPD), which encodes the freeform sag in this case, into a more readily measured OPD in the secondary interferometer. To enable high-speed measurements, we developed the secondary interferometer based on a rotating optical cube. A custom telecentric objective lens and a custom pupil relay enable optical scanning over the sample surface. Experimental results validate the C-OCT technique with consecutive single-point measurements showing precision of ±26 nm (~λ/24 at the He-Ne wavelength) and a preliminary flat surface measurement demonstrating 22 nm RMS (~λ/28) over a central 20 mm diameter region. Developments on the system are underway towards surface measurements on freeform optical components.
The UNESCO International Day of Light, 16 May, serves to highlight the critical and diverse roles that light plays in our daily lives. Light has specific meaning to each local community, and finding that which has the greatest impact can be challenging. In the proper context, local festivals serve as a fertile ground for light appreciation, bringing together diverse local groups. We provide the devices for exploration of colorimetry, imaging, and color matching demonstrations at an otherwise social local festival. Methods of assembly and planning for the multi-day display are outlined.
Knowing the thermodynamic phase of a cloud–whether it is composed of spherical water droplets or polyhedral ice crystals–is critical in remote sensing applications and in climate studies. We recently showed that we can determine cloud phase with visible-wavelength sky polarimetry, and in this presentation we extend that method to shortwave infrared wavelength bands near 1.6 microns. We describe the instrument, a passive, three-channel polarimeter with spectral bands at 1550 nm, 1640 nm, and 1700 nm with approximate width of 40 nm and how we are using it in experiments to discriminate between liquid-water and ice clouds. This portable polarimeter measures scattered sunlight using polarizers orientated at 0° , 45‡ , and 90° with respect to the solar vertical scattering plane. It has a 4.9° field-of-view and a motorized, computer-controlled pan-and-tilt mount that controls the positioning of the polarimeter so that it can measure any point in the sky.
Getting students interested in science, specifically in optics and photonics, is a worthwhile challenge. We developed and implemented an outreach campaign that sought to engage high school students in the science of polarized light. We traveled to Montana high schools and presented on the physics of light, the ways that it becomes polarized, how polarization is useful, and how to take pictures with linear polarizers to see polarization. Students took pictures that showed polarization in either a natural setting or a contrived scene. We visited 13 high schools, and presented live to approximately 450 students.
We present the design, fabrication, and characterization of a polarization-selective infrared bandpass filter based on a two-layer subwavelength metallic grating for use in polarimetric imaging. Gold nanowires were deposited via physical vapor deposition (PVD) onto a silicon surface relief grating that was patterned using electron beam lithography (EBL) and fabricated using standard silicon processing techniques. Optical characterization with a broad-spectrum tungsten halogen light source and a grating spectrometer showed normalized peak TM transmission of 53% with a full-width at half-maximum (FWHM) of 122 nm, which was consistent with rigorous coupled-wave analysis (RCWA) simulations. Simulation results suggested that device operation relied on suppression of the TM transmission caused by surface plasmon polariton (SPP) excitation at the gold-silicon interface and an increase in TM transmission caused by a Fabry-Perot (FP) resonance in the cavity between the gratings. TE rejection occurred at the initial air/gold interface. We also present simulation results of an improved design based on a two-dielectric grating where two different SPP resonances allowed us to improve the shape of the passband by suppressing the side lobes. This newer design resulted in improved side-band performance and increased peak TM transmission.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.