ESO’s Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.
BIFROST is a new Y+J and H band beam combiner for the VLTI, and part of the Asgard suite of visitor instruments. BIFROST will unlock a new parameter space at the VLTI by including the astronomical J band and high spectral resolution (up to R ≈ 25,000). It will also have the ability to simultaneously observe on- and off-axis targets. BIFROST’s beam combiner will be an integrated optics chip, fed by single mode optical fibers. BIFROST therefore requires a light injection module to couple the starlight from free space in the VLTI laboratory into the single mode fibers. The light injection module of BIFROST is also responsible for redirecting the starlight towards the fiber couplers; removing the optical path difference between the beams; co-phasing BIFROST with the rest of the Asgard suite; splitting the light off for the off-axis field; selecting the pointing of the off-axis field; optimizing the injection into the fibers; co-phasing the on- and off-axis light; supporting the passage of the full two arcsecond diameter field of view and providing sufficient space for additional BIFROST pre-injection optics. In this contribution we detail the novel design of the BIFROST light injection module, highlighting how it achieves this functionality using as few optics as possible. We also present Zemax Opticstudio tolerancing analysis, demonstrating the feasibility of building this design in the laboratory.
We report progress on Project Prime (PRecision Interferometry with MIRC for Exoplanets) to detect exoplanets using precision closures using MIRC-X and MYSTIC at CHARA. Our investigations include modeling systematics caused by OPD drifts, differential dispersion, beamtrain birefringence, and flatfielding errors. Injection tests suggest we can recover hot Jupiter companions as faint at 1/5000 of the host star brightness with 4 nights of observing and we will present some results of our recent searches for the hot Jupiters. Our upper limits are starting to constrain current-generation Global Circulation Models (GCMs). We propose the addition of modest nulling (10:1) to today’s interferometers in order to vastly increase the ease of this work and to open up many more targets for detections.
BIFROST, an upcoming instrument for the VLTI, is part of the Asgard Suite, a VLTI visitor instrument. It comprises two spectrograph arms that are optimised for wavelength range of 1- 1.75μm (fed by a fiber that is placed on-axis for fringe tracking/monitoring) and 1-1.3μm (fed by a fiber that can positioned either on-axis or off-axis to observe a faint target) wavelength range, respectively. Volume phase holographic gratings (VPHGs) are employed to achieve high spectral resolving power up to 25,000 and a throughput above 75% for all dispersing elements. In this contribution, we discuss the optical and optomechanical design of the spectrographs, as well as a new relay optics design that minimizes the thermal background, with a factor 4 reduction in thermal background compared to the non-relay optics design. We will also present the first lab results obtained with the YJH spectrograph.
The Magdalena Ridge Observatory Interferometer (MROI) and its first science beam combiner the Free-space Optical multi-apertUre combineR for IntERferometry (FOURIER) are undergoing the first phase of construction near Magdalena, New Mexico. MROI and FOURIER are designed for unprecedented sensitivity to enable imaging of faint astronomical targets. FOURIER provides highly sensitive simultaneous interferometric observations in the J, H, and K bands. In preparation for first fringes with FOURIER, we are developing a data reduction pipeline to produce high quality science ready data products adhering to the OIFITS2 data standard.
The BIFROST instrument is poised to revolutionize high-spectral resolution interferometry at the VLTI by extending the accessible wavelength range down to 1.0μm, encompassing the Y, J, and H bands. In this paper, we discuss the optical design for BIFROST’s pre-injection optics which correct for birefringence effects and longitudinal dispersion between the different beam lines. We present the optomechanical design for the light injection module that compresses the beams and injects them into single-mode fibres, while maintaining the full field-of-view of the VLTI auxiliary or unit telescopes. Our fibre switching module will allow for the injection of light into photonic devices optimised for different wavebands or applications. Finally, we outline our integration and alignment strategy and present the first characterisation results obtained in the optics lab at the University of Exeter.
BIFROST is the short-wavelength, high-spectral resolution instrument in the Asgard Suite of VLTI visitor instruments. It will be optimized for spectral line studies in the Y, J, and H bands (1.05-1.75 μm) that include many strong lines & molecular features. In this presentation, we outline the BIFROST science drivers that have guided our design choices and map them against the operational modes that are being implemented. We give an overview about the status of the project and the milestones from the ongoing integration & testing phase in Exeter to shipping & commissioning on Paranal, scheduled for 2025 and 2026. We review the BIFROST subsystems and discuss how they interface with the broader Asgard Suite. Finally, we outline other BIFROST-related activities pursued by our group that are intended for implementation in BIFROST as part of future upgrades.
METIS, the Mid-Infrared ELT Imager and Spectrograph is a first-generation ELT instrument scheduled to see first light in 2029. Its two main science modules are supported by an adaptive optics system featuring a pyramid sensor with 90x90 sub-apertures working in H- and K-band. The wavefront control concept for METIS’ single-conjugate adaptive optics relies on a synthetic calibration that uses a model of the telescope and instrument to generate the interaction and control matrices, as well as the final projection on a modal command vector. This concept is enforced owing to the absence of a calibration source in front of the ELT’s main deformable mirror. The core of the synthetic calibration functionality is the Command Matrix Optimiser module, which consists of several components providing models for various parts and aspects of the instrument, as well as the entire reconstructor. Many are present in the simulation environment used during the design phases, but need to be re-written and/or adapted for real-life use. In this paper, we present the design of the full command matrix optimisation module, the status of these efforts and the overall final concept of METIS’ soft real-time system.
The SCAO subsystem is crucial to enable METIS to achieve its scientific goals, delivering a Strehl ratio of 0.93 in the N band at the ELT. The ELT itself will only be available after integration of METIS at the facility, clearly too late in the development life cycle for subsystem testing. Therefore, we are building a hardware ELT simulator for use in the laboratory, capable of applying atmospheric distortions and receiving and applying real-time corrections from SCAO, closing the loop in the laboratory. In this contribution we present the design of the telescope simulator, MITESI, highlighting which functionality of the ELT it can and cannot replicate. We also detail what aspects of SCAO MITESI will allow us to validate. Finally, we present tests of components of MITESI and a timeline for developing it further.
METIS, the Mid-infrared ELT Imager and Spectrograph, will be one of the first instruments to be used at ESO’s 39m Extremely Large Telescope (ELT), that is currently under construction. With that, a number of firsts are to be addressed in the development of METIS’ single-conjugate Adaptive Optics (SCAO) system:
• the size of the telescope and the associated complexity of the wavefront control tasks
• the unique scientific capabilities of METIS, including high contrast imaging
• the interaction with the newly established, integrated wavefront control infrastructure of the ELT
• the integration of the near-infrared Pyramid Wavefront Sensor and other key Adaptive Optics (AO) hardware embedded within a large, fully cryogenic instrument.
METIS and it’s AO system have passed the final design review and are now in the manufacturing, assembly, integration and testing phase. The firsts are approached through a compact hard- and software design and an extensive test program to mature METIS SCAO before it is deployed at the telescope. This program includes significant investments in test setups that allow to mimic conditions at the ELT. A dedicated cryo-test facility allows for subsystem testing independent of the METIS infrastructure. A telescope simulator is being set up for end-to-end laboratory tests of the AO control system together with the final SCAO hardware. Specific control algorithm prototypes will be tested on sky. In this contribution, we present the progress of METIS SCAO with an emphasis on the preparation for the test activities foreseen to enable a successful future deployment of METIS SCAO at the ELT.
European Southern Observatory (ESO)’s Very Large Telescope Interferometer (VLTI), Paranal, Chile, is one of the most proficient observatories in the world for high angular resolution astronomy. It has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. We propose to ESO a new concept for a visitor instrument for the VLTI: Asgard. It is an instrumental suite comprised of four natively collaborating instruments: High-Efficiency Multiaxial Do-it ALL Recombiner (HEIMDALLR), an all-in-one instrument performing both fringe tracking and stellar interferometry with the same optics; Baldr, a Strehl optimizer; Beam-combination Instrument for studying the Formation and fundamental paRameters of Stars and planeTary systems (BIFROST), a combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; and Nulling Observations of dusT and planeTs (NOTT), a nulling interferometer dedicated to imaging young nearby planetary systems in the L band. The overlap between the science cases across different spectral bands yields the idea of making the instruments complementary to deliver sensitivity and accuracy from the J to L bands. Asgard is to be set on the former AMBER optical table. Its control architecture is a hybrid between custom and ESO-compliant developments to benefit from the flexibility offered to a visitor instrument and foresee a deeper long-term integration into VLTI for an opening to the community.
The Michigan Young Star Imager at CHARA (MYSTIC) is a K-band interferometric beam combining instrument funded by the U.S. National Science Foundation, designed primarily for imaging sub-au scale disk structures around nearby young stars and to probe the planet formation process. Installed at the CHARA Array in July 2021, with baselines up to 331 m, MYSTIC provides a maximum angular resolution of λ / 2B ∼ 0.7 mas. The instrument injects phase-corrected light from the array into inexpensive, single-mode, polarization maintaining silica fibers, which are then passed via a vacuum feedthrough into a cryogenic dewar operating at 220 K for imaging. MYSTIC uses a high frame rate, ultra-low read noise SAPHIRA detector and implements two beam combiners: a six-telescope image plane beam combiner, based on the MIRC-X design, for targets as faint as 7.7 Kmag, as well as a four-telescope integrated optic beam-combiner mode using a spare chip leftover from the GRAVITY instrument. MYSTIC is co-phased with the MIRC-X (J + H band) instrument for simultaneous fringe-tracking and imaging and shares its software suite with the latter to allow a single observer to operate both instruments. We present the instrument design, review its operational performance, present early commissioning science observations, and propose upgrades to the instrument that could improve its K-band sensitivity to 10th magnitude in the near future.
The Very Large Telescope Interferometer is one of the most proficient observatories in the world for high angular resolution. Since its first observations, it has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI yields countless discoveries and technological breakthroughs. We introduce to the VLTI the new concept of Asgard: an instrumental suite including four natively collaborating instruments: BIFROST, a stellar interferometer dedicated to the study of the formation of multiple systems; Hi- 5, a nulling interferometer dedicated to imaging young nearby planetary systems in the M band; HEIMDALLR, an all-in-one instrument performing both fringe tracking and stellar interferometry with the same optics; Baldr, a fibre-injection optimiser. These instruments share common goals and technologies. Thus, the idea of this suite is to make the instruments interoperable and complementary to deliver unprecedented sensitivity and accuracy from J to M bands. The interoperability of the Asgard instruments and their integration in the VLTI are the main challenges of this project. In this paper, we introduce the overall optical design of the Asgard suite, the different modules, and the main challenges ahead.
We present science cases and instrument design considerations for the BIFROST instrument that will open the short-wavelength (Y/J/H-band), high spectral dispersion (up to R=25,000) window for the VLT Interferometer. BIFROST will be part of the Asgard Suite of instruments and unlock powerful venues for studying accretion & mass-loss processes at the early/late stages of stellar evolution, for detecting accreting protoplanets around young stars, and for probing the spin-orbit alignment in directly-imaged planetary systems and multiple star systems. Our survey on GAIA binaries aims to provide masses and precision ages for a thousand stars, providing a legacy data set for improving stellar evolutionary models as well as for Galactic Archaeology. BIFROST will enable off-axis spectroscopy of exoplanets in the 0.025-1" separation range, enabling high-SNR, high spectral resolution follow-up of exoplanets detected with ELT and JWST. We give an update on the status of the project, outline our key technology choices, and discuss synergies with other instruments in the proposed Asgard Suite of instruments.
The BIFROST instrument will be the first VLTI instrument optimised for high spectral resolution up to R=25,000 and operate between 1.05 and 1.7 μm. A key component of the instrument will be the spectrograph, where we require a high throughput over a broad bandwidth. In this contribution, we discuss the four planned spectral modes (R=50, R=1000, R=5000, and R=25,000), the key spectral windows that we need to cover, and the technology choices that we have considered. We present our plan to use Volume Phase Holographic Gratings (VPHGs) to achieve a high efficiency > 85%. We present our preliminary optical design and our strategies for wavelength calibration.
BIFROST will be a short-wavelength (λ = 1.0 - 1.7 μm) beam combiner for the VLT Interferometer, combining both high spatial (λ/2B = 0.8 mas) and spectral (up to R = 25,000) resolution. It will be part of the Asgard Suite of visitor instruments. The new window of high spectral resolution, short wavelength observations brings with it new challenges. Here we outline the instrumental design of BIFROST, highlighting which beam combiner subsystems are required and why. This is followed by a comparison All-In-One (AIO) beam combination scheme and an Integrated Optics (IO) scheme with ABCD modulation both in terms of expected sensitivity and the practical implementation of each system.
FOURIER is the first-generation science beam combiner for the MROI. It is a three-way, J, H and K band image plane combiner. The FOURIER design emphasises low visibility losses and high optical throughput and is designed around a low-noise SAPHIRA detector. Based on laboratory measurements of its throughput and visibility losses, FOURIER is expected to reach limiting magnitudes of 12.3, 13.2 and 11.7 in the J, H and K bands, respectively, within 5 minutes of incoherent integration assuming 0.7′′ seeing and a detector read noise of 0.3 electrons. As FOURIER observes as red as the K band, the detector and most of its optics are placed within a liquid nitrogen cryostat. We present the design of FOURIER’s cryostat, as well as laboratory tests of the instrument’s cryogenic performance. We also report room temperature characterisation of the optics. Finally, we discuss the path forward from the current status of the instrument to first fringes in 2023.
The Magdalena Ridge Observatory Interferometer (MROI) is designed to operate 10 1.4m telescopes simultaneously, with baselines ranging from 7.8-347 m and limiting infrared fringe-tracking magnitudes of 14 – it is arguably the most ambitious optical/infrared imaging interferometer under construction today. In this paper we had intended to present an update of activities since the 2018 SPIE meeting as we approached a demonstration of first fringes with the facility originally anticipated for the fall of 2020. However, due to the global pandemic and a loss of funding for our project via AFRL, we have been unable to make the progress we intended. In this paper, we present results up through March, 2020 and a brief discussion of the path forward for the facility.
We present the design and testing of FOURIER, the first generation science beam combiner for the MROI. FOURIER is a three-way, J, H and K band image plane combiner which is designed primarily for observations at faint limiting magnitudes. We outline the main science requirements and discuss how the design of FOURIER contributes to meeting these requirements. We present the first laboratory characterisation of the instrument including validation of the PSF profile, demonstration of high contrast fringes, and the spectral resolution of the instrument, all of which show promising results. We conclude by discussing the path to deployment of FOURIER at the MROI ahead of the first science observation at the array.
The Magdalena Ridge Observatory Interferometer (MROI) has been under development for almost two decades. Initial funding for the facility started before the year 2000 under the Army and then Navy, and continues today through the Air Force Research Laboratory. With a projected total cost of substantially less than $200M, it represents the least expensive way to produce sub-milliarcsecond optical/near-infrared images that the astronomical community could invest in during the modern era, as compared, for instance, to extremely large telescopes or space interferometers. The MROI, when completed, will be comprised of 10 x1.4m diameter telescopes distributed on a Y-shaped array such that it will have access to spatial scales ranging from about 40 milliarcseconds down to less than 0.5 milliarcseconds. While this type of resolution is not unprecedented in the astronomical community, the ability to track fringes on and produce images of complex targets approximately 5 magnitudes fainter than is done today represents a substantial step forward. All this will be accomplished using a variety of approaches detailed in several papers from our team over the years. Together, these two factors, multiple telescopes deployed over very long-baselines coupled with fainter limiting magnitudes, will allow MROI to conduct science on a wide range and statistically meaningful samples of targets. These include pulsating and rapidly rotating stars, mass-loss via accretion and mass-transfer in interacting systems, and the highly-active environments surrounding black holes at the centers of more than 100 external galaxies. This represents a subsample of what is sure to be a tremendous and serendipitous list of science cases as we move ahead into the era of new space telescopes and synoptic surveys. Additional investigations into imaging man-made objects will be undertaken, which are of particular interest to the defense and space-industry communities as more human endeavors are moved into the space environment.
In 2016 the first MROI telescope was delivered and deployed at Magdalena Ridge in the maintenance facility. Having undergone initial check-out and fitting the system with optics and a fast tip-tilt system, we eagerly anticipate installing the telescope enclosure in 2018. The telescope and enclosure will be integrated at the facility and moved to the center of the interferometric array by late summer of 2018 with a demonstration of the performance of an entire beamline from telescope to beam combiner table shortly thereafter. At this point, deploying two more telescopes and demonstrating fringe-tracking, bootstrapping and limiting magnitudes for the facility will prove the full promise of MROI. A complete status update of all subsystems follows in the paper, as well as discussions of potential collaborative initiatives.
The Magdalena Ridge Observatory Interferometer (MROI) is currently under construction in New Mexico at an altitude of 3.2 km. When completed it will consist of ten 1.4 m telescopes and will operate at wavelengths from 0.6 to 2.4 μm. Here we present the preliminary design of the Free-space Optical multi-apertUre combineR for IntERferometry (FOURIER), the first generation near infrared science beam combiner at the MROI which is currently under development. The combiner will operate in the J, H and K bands and combine three beams from the currently funded subset of three telescopes. The primary aim of the combiner is to achieve high sensitivity leading to its unique design.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.