KEYWORDS: Particles, Sensors, Data acquisition, Space operations, Magnetism, Microcontrollers, Field programmable gate arrays, Electronics, Atmospheric particles, Space telescopes
The Loss Cone Imager (LCI) will sample the energetic-particle pitch-angle distributions relative to the local geomagnetic field vector in the magnetosphere as a part of the Demonstration and Science Experiment (DSX) satellite. A description of the LCI electrical interfaces and data flow will be presented. The pitch angle and energy of energetic particles are recorded by the FSH (Fixed Sensor Head) and HST (High Sensitivity Telescope) sensor electronics using
solid state detectors. Energetic particle data must be extracted from the FSH and HST by the DPU (Data Processing Unit) and stored in a format that is practical for ground data analysis. The DPU must generate a data packet that is sent to the experiment computer containing science and housekeeping data, as well as receive ground and time commands from the experiment computer. The commands are used to configure the sensor electronics and change the data
acquisition periods of the science data. The instrument works in conjunction with the WIPER (Wave-Induced Precipitation of Electron Radiation) VLF (Very Low Frequency) transmitter on the DSX satellite to view the effects of VLF waves injected in the Earth's magnetic field on the precipitation of electrons into the Loss Cone. The system is designed to operate autonomously with the changing state of the transmitter to provide more appropriate data for examining the effects of the VLF transmitter.
The Loss Cone Imager (LCI) instrument is part of the US Air Force Demonstration and Science Experiments (DSX) satellite and is comprised of three components: the Fixed Sensor Head (FSH), the High Sensitivity Telescope (HST), and the Central Electronics Unit (CEU). The emphasis of this paper is on the FSH, which is comprised of three Si solid state detectors (SSD) each comprised of six pixels capable of measuring incident particle energies (~ 30 keV - 500 keV) and their respective pitch angles. The FSH is mounted onto the exterior of the DSX Payload Module and covers a 180° by
10° view of the sky. Each pixel has a 10° by 10° field of view. Due to a small geometric factor, the FSH is able to operate
in the high particle flux areas of the Earth's magnetosphere. The Readout Electronics for Nuclear Application 3 (RENA3) chip, developed by NOVA R&D, contains 36 analog channels used for detection of nuclear events. Each of the 18 Si pixels is connected to a corresponding RENA3 channel for event detection and analog energy readout. The output of the chip is digitized and the digital value of each event, along with its corresponding RENA channel, is recorded by the Data Processing Unit housed in the CEU.
KEYWORDS: Sensors, Electrons, Amplifiers, Particles, Collimators, Telescopes, Space telescopes, Analog electronics, Signal detection, Solid state electronics
The High Sensitivity Telescope (HST) is a sensor comprising part of the Loss Cone Imager (LCI) on the DSX mission. The primary objective of the HST is to observe fluxes of energetic electrons as small as 100 e cm-2sr-1s-1 within the Earth's atmospheric loss cone. This is accomplished via a geometrical factor of 0.1 cm2sr combined with a collimator limiting the field of view to a 7 degree half-cone angle. The sensors are shielded to in order to reduce the background to levels permitting the detection of the stated flux. The HST will be looking for changes in this flux caused by events precipitating electrons into the atmosphere. Of primary interest are electrons
with energies between 20 and 500 keV. The HST utilizes two fully depleted solid state detectors and three analog measurement chains. The primary detector is 1500 um thick and uses two measurement chains. A faster measurement chain for counting events at rates of 300k/sec and a slower measurement chain for measuring the
energy deposited by an event more accurately. The secondary detector is 1000 um thick and is used to detect events that completely penetrate the primary detector. The analog electronics are built from discreet amplifiers. Events on the faster primary chain are sorted into 5 energy bins. Events from the slow chain are digitized to 8-bits of resolution.
A mechanical housing design is developed to ensure the survival of electronics and optimize the performance of solid
state detectors orbiting through the Van Allen radiation belts. This design is part of the Loss Cone Imager on board the
AFRL's DSX satellite and consists of three mechanically separate units: Fixed Sensor Head; High Sensitivity Telescope;
and Central Electronics Unit. These units need to withstand the vibrations and shocks associated with launch as well as
provide shielding to highly energetic radiation and micrometeorite impacts. To obtain optimal performance from the
detectors and high reliability from the electronics thermal restrictions are incorporated into the mechanical designs.
Ground Support Equipment (GSE) [1] is a versatile and multifunctional graphical user interface (GUI) and a
software/hardware platform. It is a custom-designed system executed in the LabVIEW programming language to serve
as an instrument health monitor for the Loss Cone Imager (LCI) satellite project. GSE mimics the behavior of the onboard
Experiment Computer System (ECS). Its functions comprise the measurement of voltage, current, and power, as
well as acting as a safety mechanism in case of any anomalous condition (e.g., over-current and/or over-voltage
situation). Individual log files record the sessions during which data is gathered and analyzed. Safety/warning alarm
flags shall be 'visible' from any individual window/tab. Analog-to-Digital Conversion (ADC) particle group
measurements will be displayed on six individual panels. GSE will be supplemented with a comprehensive user's
manual for added clarity.
Conference Committee Involvement (1)
Solar Physics and Space Weather Instrumentation VI
9 August 2015 | San Diego, California, United States
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.