Superconducting nanowire single-photon detectors (SNSPDs) are a key building block in photon-based quantum computation and communication. To realize a scalable photonic device, integration of SNSPDs on waveguides is necessary. Hereby, one of the most promising waveguide materials is lithium niobate-on-insulator (LNOI). To find the ideal superconductor growth conditions, in this case NbTiN on LNOI, we created a series of superconducting films, while varying the superconductors stoichiometry. Here, the produced SNSPDs become more sensitive at a higher nitrogen content, while for lower amounts of nitrogen the recovery time is reduced, allowing for a direct correlation of sputter conditions and SNSPD performance.
Nowadays, Superconducting Nanowire Single-Photon Detectors (SNSPDs) play a significant role in quantum technologies and for general faint light detection. Typically, NbTiN SNSPDs are at most 8nm thick to achieve single-photon sensitivity. However, as absorption increases with film thickness, it is desirable to use thicker films of 10 or 12nm considering that the absorption probability places an upper limit for the achievable system detection efficiency. In this contribution, we present for the first time 12nm thick NbTiN SNSPDs that show an increase of system detection efficiency from less than 0.01% to 55% and saturating internal detection efficiency at 4K after irradiation with helium ions. Furthermore, we investigated the influence of helium ion irradiation on the transport properties of the underlying superconducting films.
In recent years, Superconducting Nanowire Single-Photon Detectors (SNSPDs) have obtained tremendous attention as a possible key technology for photonic quantum processing and faint light detection.
Here, we present our recent progress on engineering of the properties of NbTiN SNSPDs fabricated on various substrates measured. We discuss approaches to simultaneously improve the most important figures of merit (DCR, dead time, timing jitter, efficiency) as well as efficient characterization methods. Specifically, for the latter we investigate the impact of the substrate material on the performance parameters as well as the fundamental interrelation of the resulting voltage pulse properties, such as pulse height, rise time and timing jitter, and their dependence on the applied bias current.
KEYWORDS: Superconductors, Single photon detectors, Sensors, Nanowires, Quantum efficiency, Near infrared, Deep reactive ion etching, Thin films, Single photon, Resonators
In this work, recent developments in the study of Superconducting Nanowire Single Photon Detectors (SNSPDs) are presented. This devices properties highly depends on the quality of the superconducting films from which they are fabricated. Here, we study some film properties for SNSPDs made out of NbTiN and MoSi in function of the deposition parameters. Subsequently we focus on the properties of the fabricated detector, such as efficiency, timing resolution and energy sensitivity.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.