The FOXSI-4 sounding rocket will fly a significantly upgraded instrument in NASA's first solar are campaign. It will deploy direct X-ray focusing optics which have revolutionized our understanding of astrophysical phenomena. For example, they have allowed NuSTAR to provide X-ray imaging and IXPE (scheduled for launch in 2021) to provide X-ray polarization observations with detectors with higher photon rate capability and greater sensitivity than their predecessors. The FOXSI sounding rocket is the first solar dedicated mission using this method and has demonstrated high sensitivity and improved imaging dynamic range with its three successful flights. Although the building blocks are already in place for a FOXSI satellite instrument, further advances are needed to equip the next generation of solar X-ray explorers. FOXSI-4 will develop and implement higher angular resolution optics/detector pairs to investigate fine spatial structures (both bright and faint) in a solar are. FOXSI-4 will use highly polished electroformed Wolter-I mirrors fabricated at the NASA/Marshall Space Flight Center (MSFC), together with finely pixelated Si CMOS sensors and fine-pitch CdTe strip detectors provided by a collaboration with institutes in Japan. FOXSI-4 will also implement a set of novel perforated attenuators that will enable both the low and high energy spectral components to be observed simultaneously in each pixel, even at the high rates expected from a medium (or large) size solar are. The campaign will take place during one of the Parker Solar Probe (PSP) perihelia, allowing coordination between this spacecraft and other instruments which observe the Sun at different wavelengths.
The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket payload achieved its third successful flight on September 7, 2018. FOXSI uses glancing-incidence Wolter-I mirrors combined with fine-pitch Si and CdTe detectors to perform direct solar Hard X-Ray (HXR) imaging spectroscopy. For FOXSI’s latest flight, several upgrades were made to the instrument, including updating the optics and detectors as well as adding new honeycomb type collimators to reduce Ghost rays background. We provide an overview of these updates as well as a discussion of their measured performance.
The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment demonstrates the technique of focusing hard X-ray (HXR) optics for the study of fundamental questions about the high-energy Sun. Solar HXRs provide one of the most direct diagnostics of accelerated electrons and the impulsive heating of the solar corona. Previous solar missions have been limited in sensitivity and dynamic range by the use of indirect imaging, but technological advances now make direct focusing accessible in the HXR regime, and the FOXSI rocket experiment optimizes HXR focusing telescopes for the unique scientific requirements of the Sun. FOXSI has completed three successful flights between 2012 and 2018. This paper gives a brief overview of the experiment, focusing on the third flight of the instrument on 2018 Sept. 7. We present the telescope upgrades highlighting our work to understand and reduce the effects of singly reflected X-rays and show early science results obtained during FOXSI's third flight.
The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment aims to investigate fundamental questions about the high-energy Sun through direct imaging and spectroscopy of hard X-rays. The experiment utilizes Wolter-I type nested hard X-ray mirrors and fine-pitch semiconductor detectors, which are separated by a 2m focal length. Tol date, FOXSI has had two successful flights, on 2012 November 02 and 2014 December 11, demonstrating that the technology can measure small-scale energy releases (microflares and aggregated nanoflares) from the solar corona. The third flight for FOXSI is scheduled for August 2018. Significant improvements have been made on the FOXSI instrumentation, including upgraded optic modules with more nested mirror shells; specially designed collimators to mitigate the number of single bounce photons (ie., ghost rays) reaching the focal plane detector; and fine-pitch double-sided CdTe strip detectors to replace some of the Si-based hard X-ray detectors for better efficiency for hard X-rays. Furthermore, a CMOS based soft X-ray (SXR) instrument, “Phoenix”, will be added to FOXSI-3 by replacing one hard X-ray detector with a photon-counting SXR sensor. This will enable evaluation of the Sun via imaging spectroscopy simultaneously over a large X-ray energy range covering soft to hard X-rays. This paper will describe the overall instrument design of the FOXSI-3 experiment, which will be sensitive to solar soft and hard X-rays in the 1 – 20 keV range, as well as give a summary of insightful results and lessons from the first two flights. Possible observations for FOXSI-3 will also be discussed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.