The high-energy modular array (HEMA) is one of three instruments that compose the Spectroscopic Time-Resolving Observatory for Broadband Energy X-rays (STROBE-X) mission concept. The HEMA is a large-area, high-throughput non-imaging pointed instrument based on the large area detector (LAD) developed as part of the Large Observatory For X-ray Timing (LOFT) mission concept. It is designed for spectral timing measurements of a broad range of sources and provides a transformative increase in sensitivity to X-rays in the energy range of 2 to 30 keV compared with previous instruments, with an effective area of 3.4 m2 at 8.5 keV and an energy resolution of better than 300 at 6 keV in its nominal field of regard.
KEYWORDS: Space operations, Sensors, Equipment, Gamma radiation, Signal detection, Silicon photomultipliers, Data archive systems, Observatories, Data processing, Design
BurstCube is a 6U (10 x 20 x 30 cm) CubeSat designed to detect gamma-ray bursts (GRBs) and enable multimessenger observations, scheduled to launch in early 2024. BurstCube science is informed by the coincident detection of GRB 170817A and gravitational wave (GW) 170817, which confirmed compact binary mergers as progenitors for GRBs. Future coincident detections will also provide important context to the GW measurements - namely constraining the neutron star equation of state and testing fundamental physics, while also probing the origin of GRB prompt emission. Full sky coverage in the gamma-ray regime is needed to increase the likelihood of such measurements. Once in orbit, BurstCube will expand sky coverage while rapidly providing public alerts and localization information to the community using the Tracking and Data Relay Satellite (TDRS) and General Coordinates Network (GCN). This work will describe the current status of the mission, as well as an outline of post-launch operations, performance, and science goals.
There is a growing interest in the science uniquely enabled by observations in the MeV range, particularly in light of multi-messenger astrophysics. The Compton Pair (ComPair) telescope, a prototype of the AMEGO Probe-class concept, consists of four subsystems that together detect and characterize gamma rays in the MeV regime. A double-sided strip silicon Tracker gives a precise measure of the first Compton scatter interaction and tracks pair-conversion products. A novel cadmium zinc telluride (CZT) detector with excellent position and energy resolution beneath the Tracker detects the Compton-scattered photons. A thick cesium iodide (CsI) calorimeter contains the high-energy Compton and pair events. The instrument is surrounded by a plastic anti-coincidence (ACD) detector to veto the cosmic-ray background. In this work, we will give an overview of the science motivation and a description of the prototype development and performance.
This conference presentation was prepared for the conference on Space Telescopes and Instrumentation 2022: Ultraviolet to Gamma Ray, part of SPIE Astronomical Telescopes + Instrumentation, 2022.
This paper details preliminary photon measurements with the monolithic silicon detector ATLASPix, a pixel detector built and optimized for the CERN experiment ATLAS. The goal of this paper is to determine the promise of pixelated silicon in future space-based gamma-ray experiments. With this goal in mind, radioactive photon sources were used to determine the energy resolution and detector response of ATLASPix; these are novel measurements for ATLASPix, a detector built for a ground-based particle accelerator. As part of this project a new iteration of monolithic Si pixels, named AstroPix, have been created based on ATLASPix, and the eventual goal is to further optimize AstroPix for gamma-ray detection by constructing a prototype Compton telescope. The energy resolution of both the digital and analog output of ATLASPix is the focus of this paper, as it is a critical metric for Compton telescopes. It was found that with the analog output of the detector, the energy resolution of a single pixel was 7.69 ± 0.13% at 5.89 keV and 7.27 ± 1.18% at 30.1 keV, which exceeds the conservative baseline requirements of 10% resolution at 60 keV and is an encouraging start to an optimistic goal of <2% resolution at 60 keV. The digital output of the entire detector consistently yielded energy resolutions that exceeded 100% for different sources. The analog output of the monolithic silicon pixels indicates that this is a promising technology for future gamma-ray missions, while the analysis of the digital output points to the need for a redesign of future photon-sensitive monolithic silicon pixel detectors.
BurstCube aims to expand sky coverage in order to detect, localize, and rapidly disseminate information about gamma-ray bursts (GRBs). BurstCube is a ’6U’ CubeSat with an instrument comprised of 4 Cesium Iodide (CsI) scintillators coupled to arrays of Silicon photo-multipliers (SiPMs) and will be sensitive to gamma-rays between 50 keV and 1 MeV. BurstCube will assist current observatories, such as Swift and Fermi, in the detection of GRBs as well as provide astronomical context to gravitational wave (GW) events detected by LIGO, Virgo, and KAGRA. BurstCube is currently in its development phase with a launch readiness date in early 2022.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.