DInSAR technique has been long used to observe and monitor ground surface changes over large areas. Multi- temporal SAR image datasets are used for such investigations. To eliminate the issues of signal decorrelation associated with DInSAR based processing, Persistent Scatterer InSAR (PSInSAR) technique has come in a big way in the recent years where deformation studies at small scales and fine accuracy (mm-level) have been at- tempted and measured. In this paper, ground deformation of the area near Naples, Italy has been estimated for the year 2014 using a spatial correlation based PSInSAR method. Here, Cosmo-SkyMed (CSK) SLC (ascending orbit, single polarisation, stripmap Himage mode) images of Very High Resolution (VHR) were used in this study due to its capability to detect small-scale ground deformation signal over an urban area. The PSInSAR processing, used here, involves two stage selection of PS points or stable scatterers, with the coregistered SLCs and differential interferograms, using amplitude and phase analysis. The PSInSAR results were validated using time series data of two continuous GPS (cGPS) stations over the same period for the study area. The mean deformation rate over the study area was observed to be varying from -15 to +18 mm/year along line-of-sight (LOS) of Cosmo-SkyMed. Comparison between PSI derived deformation time series and cGPS measurements re- veal a good correlation with minimal discrepancies. Additionally, distinct differences were observed between the PS based LOS displacements with those obtained from cGPS based observations in case of one station compared to the other.
Differential Interferometric Synthetic Aperture Radar (DInSAR) is considered to be one of the most accurate geodetic techniques for monitoring Earth's surface change phenomena. Corner reflectors (CR) are widely used to validate the DInSAR generated deformation results because of their better phase stability and higher radar cross-section. A controlled experiment has been performed for carrying out a sensitivity analysis of DInSAR technique with the controlled vertical movement of CR in between two COSMO-SkyMed tandem passes over Jharia Coal Field. From the results, it has been observed that CR-based DInSAR experiment followed the similar displacement trend with a maximum of 10% error limit.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.