Nanoparticle phosphors made of lanthanide oxides are a promising new class of tags in biochemistry because of their large Stokes shift, sharp emission spectra, long luminescence lifetime, and good photostability. We demonstrate the application of these nanoparticles to the visualization of protein micropatterns. Luminescent europium-doped gadolinium oxide (Eu:Gd2O3) nanoparticles are synthesized by spray pyrolysis. The size distribution is from 5 to 200 nm. The particles are characterized by means of laser-induced fluorescent spectroscopy and transmission electron microscopy (TEM). The main emission peak is at 612 nm. The nanoparticles are coated with avidin through physical adsorption. biotinylated bovine serum albumin (BSA-b) is patterned on a silicon wafer using a microcontact printing technique. The wafer is then incubated in a solution of avidin-coated nanoparticles. Fluorescent microscopic images reveal that the nanoparticles are organized onto designated area, as defined by the microcontact printing process. The luminescent nanoparticles do not suffer photobleaching during the observation, which demonstrates their suitability as luminescent labels for fluorescence microscopy studies. More detailed studies are preformed using atomic-force microscopy (AFM) at a single nanoparticle level. The specific and the nonspecific binding densities of the particles are qualitatively evaluated.
While much work has focused on simulation and measurement of plasmon resonances in noble metal nanostructures, usually the simulation tool is used as a confirmation of experimental results. In this work we use a finite difference time domain (FDTD) technique to calculate the plasmon resonance and electric field enhancement of Ag nanoparticles in regular arrays on quartz substrates. Such structures have also been prepared by e-beam lithography, and the plasmon resonance and surface-enhanced Raman scattering strength of arrays with different nanoparticle size and spacing have been investigated. Arrays of cylindrical nanoparticles were fabricated with varying particle size and interparticle spacing. The observed extinction peaks agree very well with the extinction peaks as calculated by FDTD; typically within a few percent. Experimental plasmon peak widths are considerably larger than their ideal values due to inhomogeneous broadening. As expected, the particle array with highest SERS enhancement has its plasmon resonance nearest the laser and Stokes-shifted wavelengths. We believe the FDTD modeling tool is accurate enough to use as a predictive tool for engineering plasmonic nanostructures.
Nanoparticles made of lanthanide oxides are promising fluorophores as a new class of tags in biochemistry because of their large Stokes shift, sharp emission spectra, long lifetime and lack of photobleaching. We demonstrate for first time the application of these nanoparticles to the visualization of protein micropatterns. Europium-doped gadolinium oxide (Eu:Gd2O3) nanoparticles were synthesized by spray pyrolysis and were characterized by means of laser-induced fluorescent spectroscopy and TEM. Their main emission peak is at 612 nm. And their size distribution is from 5 nm to 500 nm. The nanoparticles were coated with avidin through physical adsorption. Biotinylated Bovine Serum Albumin (BSA-b) was patterned on a silicon wafer using a micro-contact printing technique. The BSA-b - patterned wafer was incubated in a solution containing the avidin-coated nanoparticles. The specific interaction between biotin and avidin was studied by means of fluorescent microscopy and atomic-force microscopy (AFM). The fluorescent microscopic images revealed that the nanoparticles were organized into designated structures as defined by the microcontact printing process - non-specific binding of the avidin-coated nanoparticles to bare substrate was negligible. The fluorescent pattern did not suffer any photobleaching during the observation process which demonstrates the suitability of Eu:Gd2O3 nanoparticles as fluorescent labels with extended excitation periods - organic dyes, including chelates, suffer bleaching over the same period. More detailed studies were preformed using AFM at a single nanoparticle level. The specific and the non-specific binding densities of the particles were qualitatively evaluated.
Patterning bioreceptors on surfaces is a key step in the fabrication of biosensors and biochips. State-of-the art technology can produce micrometer-sized biostructures, however, further miniaturization at the nanoscale will require new methods and lithographic tools. In this proceeding, we report three approaches: nanopen reader and writer (NPRW), nanografting and latex particle lithography; for creating nanostructures of small molecules, DNA and proteins. Using nanografting and NPRW, nanostructures of thiol molecules or thiolated ssDNA are fabricated within self-assembled monolayers. Proteins attach selectively to nanopatterns of thiol molecules containing bioadhesive groups such as aldehyde or carboxylates. Using latex particle lithography, arrays of protein nanostructures are produced with high throughput on mica and gold substrates. Near-physiological conditions are used in structural characterization, thus the orientation, reactivity and stability of proteins and DNA molecules within nanostructures may be monitored directly via AFM. While AFM-based approaches provide the highest precision, nanoparticle lithography can produce arrays of protein nanostructures with high throughput. The nanostructures of proteins produced by these approaches provide an excellent opportunity for fundamental investigations of biochemical reactions on surfaces, such as antigen-antibody recognition and DNA-protein interactions. These methods provide a foundation for advancing biotechnology towards the nanoscale.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.