A major endeavor of this decade is the direct characterization of young giant exoplanets at high spectral resolution to determine the composition of their atmosphere and infer their formation processes and evolution. We present the implementation and first on-sky results of the HiRISE instrument at the very large telescope (VLT), which combines the exoplanet imager SPHERE with the recently upgraded high resolution spectrograph CRIRES using single-mode fibers. After introducing the global implementation, we will present the status after commissioning and after the first science observing runs. We will, in particular, focus on the performance and th lessons learned during the development, installation and validation.
The combination on large ground-based telescopes of extreme adaptive optics (ExAO), coronagraphy and high-dispersion spectroscopy is starting to emerge as a powerful technique for the direct characterisation of giant exoplanets. High spectral resolution not only brings a major gain in terms of accessible spectral features, but it also enables to better disentangle between the stellar and planetary signals thanks to the much higher spectral content. On-going projects such as KPIC for Keck, REACH for Subaru and HiRISE for the VLT base their observing strategy on the use of a few science fibres, one of which is dedicated to sampling the PSF of the planet, while the others sample the stellar residuals in the speckle field. The main challenge in this approach is to blindly centre the science fibre on the planet’s PSF, with typically a tolerance of less than one resolution element (0.1 λ/D). Several possible centring strategies can be adopted, either based on calibration fibres retro-injecting signal to mark the position of the science fibres or based on the use of focal-plane features introduced by the ExAO system. In this proceeding, we describe different possible approaches and we compare their centring accuracy using the MITHiC high-contrast imaging testbed. For this work, MITHiC has been upgraded to reproduce a setup close to the one that will be adopted in HiRISE, the coupling system that will soon be implemented between VLT/SPHERE and VLT/CRIRES+. Our results demonstrate that reaching a specification accuracy of 0.1 λ/D is extremely challenging regardless of the chosen centring strategy. It requires a high level of accuracy at every step of the centring procedure, which can be reached with very stable instruments. We studied the contributors to the centring error in the case of MITHiC and we quantified some of the most important terms.
New generation exoplanet imagers on large ground-based telescopes are highly optimised for the detection of young giant exoplanets in the near-infrared, but they are intrinsically limited for their characterisation by the low spectral resolution of their integral field spectrographs (R < 100). High-dispersion spectroscopy at R ≫ 104 would be a powerful tool for the characterisation of these planets, but there is currently no high-resolution spectrograph with extreme adaptive optics and coronagraphy that would enable such characterisation. With project HiRISE we propose to use fiber coupling to combine the capabilities of two flagship instruments at the Very Large Telescope in Chile: the exoplanet imager SPHERE and the high-resolution spectrograph CRIRES+. The coupling will be implemented at the telescope in early 2023. We provide a general overview of the implementation of HiRISE, of its assembly, integration and testing (AIT) phase in Europe, and a brief assessment of its expected performance based on the final hardware.
The Provence Adaptive optics Pyramid Run System (PAPYRUS) is a pyramid-based Adaptive Optics (AO) system that will be installed at the Coude focus of the 1.52m telescope (T152) at the Observatoire de Haute Provence (OHP). The project is being developed by PhD students and Postdocs across France with support from staff members consolidating the existing expertise and hardware into an RD testbed. This testbed allows us to run various pyramid wavefront sensing (WFS) control algorithms on-sky and experiment on new concepts for wavefront control with additional benefit from the high number of available nights at this telescope. It will also function as a teaching tool for students during the planned AO summer school at OHP. To our knowledge, this is one of the first pedagogic pyramid-based AO systems on-sky. The key components of PAPYRUS are a 17x17 actuators Alpao deformable mirror with a Alpao RTC, a very low noise camera OCAM2k, and a 4-faces glass pyramid. PAPYRUS is designed in order to be a simple and modular system to explore wavefront control with a pyramid WFS on sky. We present an overview of PAPYRUS, a description of the opto-mechanical design and the current status of the project.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.