We present K-band commissioning observations of the Mira star prototype o Cet obtained at the ESO Very Large Telescope Interferometer (VLTI) with the VINCI instrument and two siderostats.
The observations were carried out between 2001 October and December, in 2002 January and December, and in 2003 January. Rosseland angular radii are derived from the measured visibilities by fitting theoretical visibility functions obtained from center-to-limb intensity variations (CLVs) of Mira star models. Using the derived Rosseland angular radii and the spectral energy distributions (SEDs) reconstructed from available photometric and spectrophotometric data, we find effective temperatures ranging from T_eff=3192 +/- 200 K at phase 0.13 to 2918 +/- 183 K at phase 0.26. Comparison of these Rosseland radii, effective temperatures, and the shape of the observed visibility functions with model predictions suggests that o Cet is a fundamental mode pulsator. Furthermore, we investigated the variation of visibility function and diameter with phase. The Rosseland angular diameter of o Cet increased from 28.9 +/- 0.3 mas
(corresponding to a Rosseland radius of 332 +/- 38 Rsun for a distance of D=107 +/- 12 pc) at phase 0.13 to 34.9 +/- 0.4 mas (402 +/- 46 Rsun) at phase 0.4. The observational error of the Rosseland linear radius almost entirely results from the error of the parallax, since the error of the angular diameter is only approximately 1%.
We present observations of the symbiotic star CH Cyg with a new JHK-band beam combiner mounted to the IOTA interferometer. The new beam combiner consists of an anamorphic cylindrical lens system and a grism, and allows the simultaneous recording of spectrally dispersed J-, H- and K-band Michelson interferograms. The observations of CH Cyg were conducted on 5, 6, 8 and 11 June 2001 using baselines of 17m to 25m. From the interferograms of CH Cyg, J-, H-, and K-band visibility functions can be determined. Uniform-disk fits to the visibilities give, e.g., stellar diameters of (7.8 ± 0.6) mas and (8.7 ± 0.8) mas in H and K, respectively. Angular stellar filter radii and Rosseland radii are derived from the measured visibilities by fitting theoretical center-to-limb intensity variations (CLVs) of Mira star models. The available HIPPARCOS parallax of CH Cyg allows us to determine linear radii. For example, on the basis of the K-band visibility, Rosseland radii in the range of 214 to 243 solar radii can be derived utilizing CLVs of different fundamental mode Mira models as fit functions. These radii agree well within the error bars with the corresponding theoretical model Rosseland radii of 230 to 282 solar radii. Models of first overtone pulsators are not in good agreement with the observations. The wavelength dependence of the stellar diameter can be well studied by using visibility ratios V(λ1)/V(λ2) since ratios of visibilities of different spectral channels can be measured with higher precision than absolute visibilities. We found that the 2.03 μm uniform disk diameter of CH Cyg is approximately 1.1
times larger than the 2.15 μm and 2.26 μm uniform-disk diameter.
Model-predicted and observed properties of the brightness distribution on M-type Mira disks are discussed. Fundamental issues of limb-darkening and diameter definition, of assigning observational data to diameter-type quantities and of interpreting such quantities in terms of model diameters are outlined. The influence of model properties upon interpretation of measured data is clarified. The dependence of the center-to-limb variation (CLV) of intensity on wavelength, on stellar parameters and on variability phase and cycle may be used for analyzing the geometrical and physical structure of the Mira atmosphere, for determining fundamental stellar parameters, and for investigating the quality of models. Desirable future observations include simultaneous observations in different spectral features at different phases and cycles, observation of the position of the shock front and observation of the time- and wavelength-dependence of deviations from spherical symmetry.
Our new IOTA JHK-band beam combiner allows the simultaneous recording of spectrally dispersed J-, H- and K-band Michelson interferograms. In this paper we present our IOTA observations of the Mira star T Cep with this beam combiner (observations in June 2001; four baselines in the range of 14 m to 27 m). The beam combiner optics consists of an anamorphic cylindrical lens system and a prism. From the interferograms of T Cep we derive the visibilities and the J-, H-, and K-band uniform-disk diameters of 14.0 ± 0.6 mas, 13.7 ± 0.6 mas and 15.0 ± 0.6 mas, respectively. Angular stellar filter radii and Rosseland radii are derived from the measured visibilities by fitting theoretical center-to-limb intensity variations (CLVs) of different Mira star models. The available HIPPARCOS parallax (4.76 ± 0.75 mas) of T Cep allows us to determine linear radii. For example, from the K-band visibility we derive a Rosseland radius of 329-50/+70 solar radii if we use the CLVs of the M-models as fit functions. This radius is in good agreement with the theoretical M-model Rosseland radius of 315 solar radii. The comparison of measured stellar parameters (e.g. diameters, effective temperature, visibility shape) with theoretical parameters indicates whether any of the models is a fair representation of T Cep.
The ratios of visibilities of different spectral channels can be measured with higher precision than absolute visibilities. Therefore, we use the visibility ratios V(λ1)/V(λ2) to investigate the wavelength dependence of the stellar diameter. We find that the 2.03 μm uniform-disk diameter of T Cep is about 1.26 times larger than the 2.26 μm uniform-disk diameter.
KEYWORDS: Stars, Calcium, Visibility, K band, Infrared radiation, Interferometers, Temperature metrology, Digital signal processing, Carbon monoxide, Signal processing
We have built an infrared beam combiner for the GI2T/REGAIN interferometer of the Observatoire de la Cote d'Azur. The beam controller allows us to record spectrally dispersed Michelson interference fringes in the near-infrared J-, H- or K-bands. The beam combiner has the advantage that Michelson interferograms can simultaneously be recorded in about 128 different spectral channels. The tilt of the spectrally dispersed fringes is a measure of the instantaneous optical path difference. We present the optical design of the beam combiner and GI2T/REGAIN observations of the Mira star R Cas with this beam combiner in the spectral range of 2.00 micrometers - 2.18 micrometers (observations on 22 and 25 August 1999; variability phase 0.08; V-magnitude approximately 6; seven baselines between 12 m and 24 m; reference stars Vega and (beta) Peg).
We present K-band observations of five Mira stars with the IOTA interferometer. The interferograms were obtained with the FLUOR fiber optics beam combiner which provides high- accuracy visibility measurements in spite of time-variable atmospheric conditions. For the Mira stars X Oph, R Aql, RU Her, R Ser, and V CrB we derived the uniform-disk diameters 11.7 mas, 10.9 mas, 8.4 mas, 8.1 mas, and 7.9 mas (+/- 0.3 mas), respectively. Simultaneous photometric observations yielded the bolometric fluxes. The derived angular Rosseland radii and the bolometric fluxes allowed the determination of effective temperatures. For instance, the effective temperature of R Aql was determined to be 3072 K +/- 161 K. A Rosseland radius for R Aql of 250 R. +/- 63 R. was derived from the angular Rosseland radius of 5.5 mas +/- 0.2 mas and the HIPPARCOS parallax of 4.73 mas +/- 1.19 mas. The observations were compared with theoretical Mira star models (D/P model Rosseland radius equals 255 R.; measured R Aql Rosseland radius equals 250 R. +/- 63 R.).
We present visibility measurements of the nearby Mira-like star R Doradus taken over a wide range of wavelengths (650 - 990 nm). The observations were made using MAPPIT (Masked APerture-Plane Interference Telescope), an interferometer operating at the 3.9-m Anglo-Australian Telescope. We used a slit to mask the telescope aperture and prism to disperse the interference pattern in wavelength. We observed in R Dor strong decreases in visibility within the TiO absorption bands. The results are in general agreement with theory but differ in detail, suggesting that further work is needed to refine the theoretical models.
In situ measurements with the prototype of a portable fiber- optic sensor system for the monitoring of nonpolar hydrocarbons (HC) in ground water or industrial waste water are presented. This sensor system can be used for quantitative in situ analysis of pollutants such as aromatic solvents, fuels, mineral oils or chlorinated HCs in a broad concentration range from around 200 (mu) g(DOT) L-1 up to a few 100 mg(DOT) L-1. The sensing principle is based on solid phase extraction of analyte molecules into a hydrophobic silicone cladding of a quartz glass optical fiber and the direct absorptiometric measurement of the extracted species in the polymer through the evanescent wave. The sensor can be connected via all-silica fibers with a length of up to 100 m to a filter photometer developed at the IFIA, thus allowing even remote analysis in monitoring wells. This instrument provides a sum concentration signal of the extracted organic compounds by measuring the integral absorption at the C-H overtone bands in the near-infrared spectral range. In situ measurements with the sensor system were performed in a ground water circulation well at the VEGAS research facility (Universitat Stuttgart). Here, the sensor proved to trace the HC sum concentration of xylene isomers in process water pumped from the well to a stripper column. In further experiments the sensor was combined with an oil sampling device and was tested with simulated waste waters of a commercial vehicle plant contaminated with different types of mineral oil. In this case the sensor system was able to detect the presence of mineral oil films floating on water or oil-in-water emulsions with concentrations greater than 20 ppm (v/v) within a few minutes.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.