PLATO is an exoplanet hunting mission of the European Space Agency. It is a medium-class mission, with a launch foreseen in 2026. Its prime objective is to uncover Earth-sized planets residing in their habitable zone. The payload consists in 26 cameras with a very wide field of view. These cameras consist in a Telescope Optical Unit, aligned at ambient and characterised at the operational temperature, and a Focal Plane Array bearing the detectors, and delivered after coupling with the Front End Electronics. In this contribution, we report on the alignment of the Engineering Model camera of Plato, i.e., the input metrology, the mechanical alignment of the optical unit with the focal plane array, the test environment and the optical characterisation throughout the process until the integrity check after delivery to the cryo-vacuum testing facility where the camera underwent a thorough performance demonstration. We also give a detailed description of the bolting process and the associated error budget.
The PLAnetary Transits and Oscillations of stars mission (PLATO) is an ESA M3 mission planned to detecting and characterizing extrasolar planetary systems as Earth-like exoplanets orbiting around the habitable zone of bright solartype stars. PLATO consists of 26 cameras (CAM) mounted on the same instrument platform in order to cover a large field of view (FoV) with the highest possible photon detection statistics. Each PLATO CAM consists of a telescope Optical Unit (TOU), the FPA, and the detector read-out Front End Electronics (FEE). The FPA is the structure located at the focal plane position of the CAM that supports four identical CCDs and the mechanical interface parts to match with the TOU and FEE. Due to the critical repeatability aspect of the mission, each FPAs must be identical with very stringent specifications which includes strict opto-mechanical positioning tolerances. Also the number of FPAs that have to be manufactured, integrated and tested at the same time requires a special space industrialization process and an optimized metrology verification due to the very restrictive design and schedule constraints. In order to solve this challenge a flight-representative QM has been developed in order to validate a manufacturing, assembly, integration and verification (AIV) on-ground processes. As well, an innovative metrology system has being developed for improving the alignment and verification under the tightly AIV requirements before, during and after a proper qualified campaign in a very demanding environment. INTA has adapted into an ISO6 cleanroom facility a high accuracy and vast performance non-contact CNC vision dimensional measuring system, and has developed a Ground Support Equipment (GSE) for a real-time alignment step in order to reach that requirements.
PLATO is an exoplanet hunting mission from the European Space Agency. It is a medium-class mission, with a launch foreseen in 2026. Its prime objective is to uncover Earth-sized planets residing in the habitable zone of their host star. The payload consists of 26 cameras with a very wide field-of-view. While the operational temperature of the cameras will be -80°C, the focal plane of each camera will be integrated with its telescope assembly (bearing the optics) at room temperature. The degradation of the optical quality at ambient, combined with the detector dark current and with the very high accuracy required from the alignment process bring a number of interesting challenges. In the present article, we review the alignment concept, present optical simulations of the measurements at ambient along with their analysis, and present an error budget for the optical measurements. The derivation of this error budget is easily applicable to all optical measurements to be performed during the alignment, i.e. the definition of the best image plane at the operational temperature and the optical alignment itself, at room temperature.
J. Moreno, E. Vielba, A. Manjón, A. Motos, E. Vázquez, E. Rodríguez, D. Saez, M. Sengl, J. Fernández, G. Campos, D. Muñoz, M. Mas, A. Balado, G. Ramos, C. Cerruti, M. Pajas, I. Catalán, M. Alcacera, A. Valverde, P. Pflueger, I. Vera
This paper describes the thermo-mechanical design of the Focal Plane Assembly (FPA) of the PLAnetary Transits and Oscillations of stars (PLATO) Instrument, developed by INTA and LIDAX. This is an ESA program with OHB as industry prime. In terms of assembly, alignment, and operational stability very demanding needs are required by a huge focal plane composed of four CCDs to assure the proper performance. This is translated into a complex thermomechanical design which shall be also focused on the correct production approach of the main parts involved, including several processes, and taking into account the number of cameras, and therefore Focal Plane Assemblies, to be produced (26). Part of these challenges, and their associated risks, are mitigated by means of the development of a totally representative prototype, which is currently finishing the integration phase and facing the test campaign.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.