The Magellan Extreme Adaptive Optics (MagAO-X) Instrument is an extreme AO system coming online at the end of 2019 that will be operating within the visible and near-IR. With state-of-the-art wavefront sensing and coronagraphy, MagAO-X will be optimized for high-contrast direct exoplanet imaging at challenging visible wavelengths, particularly Hα. To enable high-contrast imaging, the instrument hosts a vector apodizing phase plate (vAPP) coronagraph. The vAPP creates a static region of high contrast next to the star that is referred to as a dark hole; on MagAO-X, the expected dark hole raw contrast is ∼4  ×  10^−  6. The ability to maintain this contrast during observations, however, is limited by the presence of non-common path aberrations (NCPA) and the resulting quasi-static speckles that remain unsensed and uncorrected by the primary AO system. These quasi-static speckles within the dark hole degrade the high contrast achieved by the vAPP and dominate the light from an exoplanet. The aim of our efforts here is to demonstrate two focal plane wavefront sensing (FPWFS) techniques for sensing NCPA and suppressing quasi-static speckles in the final focal plane. To sense NCPA to which the primary AO system is blind, the science image is used as a secondary wavefront sensor. With the vAPP, a static high-contrast dark hole is created on one side of the PSF, leaving the opposite side of the PSF unocculted. In this unobscured region, referred to as the bright field, the relationship between modulations in intensity and low-amplitude pupil plane phase aberrations can be approximated as linear. The bright field can therefore be used as a linear wavefront sensor to detect small NCPA and suppress quasi-static speckles. This technique, known as spatial linear dark field control (LDFC), can monitor the bright field for aberrations that will degrade the high-contrast dark hole. A second form of FPWFS, known as holographic modal wavefront sensing (hMWFS), is also employed with the vAPP. This technique uses hologram-generated PSFs in the science image to monitor the presence of low-order aberrations. With LDFC and the hMWFS, high contrast across the dark hole can be maintained over long observations, thereby allowing planet light to remain visible above the stellar noise over the course of observations on MagAO-X. Here, we present simulations and laboratory demonstrations of both spatial LDFC and the hMWFS with a vAPP coronagraph at the University of Arizona Extreme Wavefront Control Laboratory. We show both in simulation and in the lab that the hMWFS can be used to sense low-order aberrations and reduce the wavefront error (WFE) by a factor of 3  −  4  ×  . We also show in simulation that, in the presence of a temporally evolving pupil plane phase aberration with 27-nm root-mean-square (RMS) WFE, LDFC can reduce the WFE to 18-nm RMS, resulting in factor of 6 to 10 gain in contrast that is kept stable over time. This performance is also verified in the lab, showing that LDFC is capable of returning the dark hole to the average contrast expected under ideal lab conditions. These results demonstrate the power of the hMWFS and spatial LDFC to improve MagAO-X’s high-contrast imaging capabilities for direct exoplanet imaging.

Linking a coronagraph instrument to a spectrograph via a single-mode optical fiber is a pathway toward detailed characterization of exoplanet atmospheres with current and future ground- and space-based telescopes. However, given the extreme brightness ratio and small angular separation between planets and their host stars, the planet signal-to-noise ratio will likely be limited by the unwanted coupling of starlight into the fiber. To address this issue, we utilize a wavefront control loop and a deformable mirror to systematically reject starlight from the fiber by measuring what is transmitted through the fiber. The wavefront control algorithm is based on the formalism of electric field conjugation (EFC), which in our case accounts for the spatial mode selectivity of the fiber. This is achieved by using a control output that is the overlap integral of the electric field with the fundamental mode of a single-mode fiber. This quantity can be estimated by pairwise image plane probes injected using a deformable mirror. We present simulation and laboratory results that demonstrate our approach offers a significant improvement in starlight suppression through the fiber relative to a conventional EFC controller. With our experimental setup, which provides an initial normalized intensity of 3  ×  ^{10  −  4} in the fiber at an angular separation of 4λ  /  D, we obtain a final normalized intensity of 3  ×  ^{10  −  6} in monochromatic light at λ  =  635  nm through the fiber (100  ×   suppression factor) and 2  ×  ^{10  −  5} in Δλ  /  λ  =  8  %   broadband light about λ  =  625  nm (10  ×   suppression factor). The fiber-based approach improves the sensitivity of spectral measurements at high contrast and may serve as an integral part of future space-based exoplanet imaging missions as well as ground-based instruments.