We describe the requirements and associated technology development plan for the communications data link from low mass interstellar probes. This work is motivated by several proposed deep space and interstellar missions with an emphasis on the Breakthrough Starshot project. The Starshot project is an effort to send the first low mass interstellar probes to nearby star systems and transmit back scientific data acquired during system transit within the time scale of a human lifetime. The about 104-fold increase in distance to nearby stars compared to the outer planets of our solar system requires a new form of propulsion to reach speeds of approximately 20% of the speed of light. The proposed use of a low mass sailcraft places strong constraints on the mass and power for the Starshot communications system. We compare the communications systems in current and upcoming solar system probes, New Horizons and Psyche, against the requirements for Starshot and define Figures of Merit for the communications capability in terms of data downlink rate multiplied by distance squared per unit mass. We describe current and future technology developments required for the on-board transmitter (signal generation, signal distribution, and beamforming) and for the near-Earth communications receiver (low-cost large aperture telescopes, high resolution spectrometers, and single photon counting detectors). We also describe a roadmap for technology development to meet the goals for future interstellar communications.
We evaluate the performance of a 10 W CW Ytterbium doped fiber amplifier system operating at 1064 nm suitable for use in a laser phased array directed energy system. The amplifier is optimized for use in a beacon based phased array topology.
We evaluate the feasibility of implementing a polarization diverse scheme to facilitate beacon based phase locking of a long baseline laser phased array.
Directed energy (DE) systems composed of large numbers of combined laser beams have been proposed for a number of applications, including illumination of photovoltaic cells on the moon and spacecraft propulsion. It is important to understand how the design parameters of these systems and perturbations such as misalignment and phase error affect their performance. It is also useful to evaluate the effects of phase and amplitude screens. This paper describes the development of a tool that can simulate the beam profile of over ten billion coherently combined laser elements at astronomical distances with user set locations, mode fields, amplitudes, phases, and pointing vectors.
Directed energy propulsion for interstellar travel has been proposed as an ideal method for reaching appreciable speeds relative to the speed of light: 0.2c. However, the amount of energy required necessitates a large aperture, on the order of kilometers, while mitigation of atmospheric perturbations requires a discretization of the aperture into many individual laser elements. The use of fiber lasers for these elements obligates mode-matching the fiber to the desired 10 cm aperture for a collimated beam. Various collimation systems were designed and compared. A 3-lens system with one achromat and two aspheric lenses, with two of the lenses used as a Keplerian telescope to achieve a system-shortening effect was analyzed. A similar system made with a plano-convex lens replacing the large-aperture aspheric lens with two additional compensating lenses was compared. A single diffractive optic operating at F/8 was likewise considered. The optical performance of these systems was compared, as was the cost-effectiveness. Scalability to millions of elements was required, so cost-per-system was a crucial consideration factor. Possible manufacturing processes for a diffractive system were investigated, and stamping processes for replication were analyzed to determine the possibility of replication of such an optic reliably, cheaply, and with acceptable results.
With the goal of landing crewed missions on the Moon and Mars in the next decade, mineral deposits on asteroids represent a potentially important resource for emerging space colonies. Deep-space missions can contemplate in-situ resource utilization, should suitable compounds be present. A necessary step for eventual resource exploitation is characterization of material abundances within candidate asteroids. Mineral maps could be generated by deploying CubeSat spacecraft to targeted asteroids, using Remote Laser Evaporative Molecular Absorption (R-LEMA) spectroscopy. In the R-LEMA scheme, a directed energy beam is used to probe molecular composition of a remote target. The laser-heated spot serves as a high-temperature blackbody source and ejected molecules create a plume of surface materials in front of the spot. Molecular composition is investigated by using a spectrometer to view the heated spot through the plume. Laboratory experiments allow comparison between predicted and measured profiles. Preliminary experiments described in this paper make use of solid-state samples so as to develop a library of spectra for comparison to future spectra obtained from samples in the gas phase.
To probe the molecular composition of a remote target, a laser is directed at a spot on the target, where melting and evaporation occur. The heated spot serves as a high-temperature blackbody source, and the ejected substance creates a plume of surface materials in front of the spot. Bulk molecular composition of the surface material is investigated by using a spectrometer to view the heated spot through the ejected plume. The proposed method is distinct from current stand-off approaches to composition analysis, such as Laser-Induced Breakdown Spectroscopy (LIBS), which atomizes and ionizes target material and observes emission spectra to determine bulk atomic composition. Initial simulations of absorption profiles based on theoretical models show great promise for the proposed method. This paper compares simulated spectral profiles with results of preliminary laboratory experiments. A sample is placed in an evacuated space, which is situated within the beam line of a Fourier Transform Infrared (FTIR) spectrometer. A laser beam is directed at the sample through an optical window in the front of the vacuum space. As the sample is heated, and evaporation begins, the FTIR beam passes through the molecular plume, via IR windows in the sidewalls of the evacuated space. Sample targets, such as basalt, are tested and compared to the theoretically predicted spectra.
Deep space exploration will require laser communication systems optimized for cost, size, weight, and power. To improve these parameters, our group has been developing a photonic integrated circuit (PIC) based on indium phosphide for optical pulse position modulation (PPM). A field-programmable gate array (FPGA) was programmed to serve as a dedicated driver for the PIC. The FPGA is capable of generating 2-ary to 4096-ary PPM with a slot clock rate up to 700 MHz.
Surface material on a remote target can be characterized by using a spectrometer to view a laser-heated spot on the target surface through the plume of ejected material. The concept is described as Remote Laser Evaporative Molecular Absorption (R-LEMA) spectroscopy.1,2 The proposed method is distinct from current stand-off approaches to composition analysis, such as Laser-Induced Breakdown Spectroscopy (LIBS), which atomizes and ionizes target material and observes emission spectra to determine bulk atomic composition. Initial simulations of R-LEMA absorption profiles based on theoretical models show great promise for the proposed method. This paper describes an experimental setup being developed to acquire R-LEMA spectra in the laboratory under controlled conditions that will allow comparison to theoretically predicted spectral profiles. A sample is placed in a vacuum space; a laser beam is directed at the sample, through an optical window. As the sample is heated, and evaporation begins, thermal emission from the heated spot passes through the molecular plume, then out of the vacuum space via infrared windows. The thermal emission is directed into a FT-IR spectrometer, which is equipped with a source-brightness comparator to correct for changes in source intensity during a scan. Targets of known composition are tested and laboratory measurements are compared to the theoretically predicted spectra. Laboratory spectra for composite targets are also presented, including terrestrial rocks and asteroid regolith simulant.
Effective transfer of beamed optical energy to a spacecraft requires that the source have a sufficiently small angular divergence to contain the beam within the area of the spacecraft collector. Such a directed energy system could be achieved by coherently combining many small optical sources distributed throughout a large-scale array. The fundamental unit of such a system is a master oscillator power amplifier (MOPA) which consists of a frequency stabilized laser source distributed to amplifier trees in the array. A fundamental challenge in long baseline coherent beam combination is that each source be combined with sub-wavelength accuracy over the entire array. In addition to perturbations due to mechanical and atmospheric disturbances, phase noise introduced by the amplifiers and the seed distribution network must also be accounted for in order to achieve the necessary accuracy. This work investigates the excess phase noise introduced by the amplifier stages and fiber optic links. Locking schemes that could be used to synchronize such an array are presented. The test bed used to interrogate phase noise is based on an all polarization maintaining fiber Mach-Zehnder interferometer (MZI), controlled by an FPGA based digital quadrature detection at a sampling rate of 1 MS/s yielding direct measurement of amplitude and phase with servo control for phase locking. Results for various MOPA and fiber link configurations based on Yb-doped fiber amplifiers operating at 1064 nm and kilometer scale link lengths are presented.
Asteroids impact Earth daily. Some, like the Chelyabinsk Meteor that exploded over Siberia in 2013, can cause massive disruption to human enterprise (~$33M in damages) and thousands of injuries. To mitigate this potentially disastrous threat, our group has posited a phased laser array which would be used to direct energy towards approaching asteroids or other dangerous near Earth objects (NEOs). The laser array would ablate the NEO’s surface, inducing mass ejection, that would then cause a reactant thrust on the NEO in the opposite direction of the laser. To verify this concept in a laboratory environment, this work quantitatively measured the thrust induced on basalt and other asteroid regolith simulant by a 350W laser array. By placing the sample target on a torsion balance and measuring its angle of deflection under ablation, it is possible to calculate the induced thrust per unit watt. This angular change is measured with a secondary laser that reflects off of the torsion balance into an optical position sensor. By comparing this paper’s experimental results with prior theoretical and computational work, we can surmise a theoretical relationship between NEO size and required laser power for future NEO deflection missions.
Long-period comets (LPCs) frequently transit the inner solar system, and like near-Earth asteroids (NEAs), pose a continued risk of impact with Earth. Unlike NEAs, LPCs follow nearly parabolic trajectories and approach from the distant outer solar system where they cannot be observed. An LPC on an Earth-impact trajectory is unlikely to be discovered more than a few years in advance of its arrival, even with significant advancements in sky survey detection capabilities, likely leaving insufficient time to develop and deliver an interception mission to deflect the comet. However, recent proposals have called for the development of one or more large ∼ 1 km laser arrays placed on or near Earth primarily as a means for photon propulsion of low-mass spacecraft at delta-v above what would be feasible by traditional chemical or ion propulsion methods. Such a laser array can also be directed to target and heat a threatening comet, sublimating its ices and activating jets of dust and vapor which alter the comet's trajectory in a manner similar to rocket propulsion. Simulations of directed energy comet deflection were previously developed from astrometric models of nongravitational orbital perturbations from solar heating, an analogous process that has been observed in numerous comets. These simulations are used together with the distribution of known LPC trajectories to evaluate the effect of an operational Earth-based laser array on the LPC impact risk.
In realm of optical SETI, searches for pulsed laser signals have historically been preferred over those for continuous wave beacons. There are many valid reasons for this, namely the near elimination of false positives and simple experimental components. However, due to significant improvements in laser technologies and light-detection systems since the mid-20th century, as well as new data from the recent Kepler mission, continuous wave searches should no longer be ignored. In this paper we propose a search for continuous wave laser beacons from an intelligent civilization in the Andromeda galaxy. Using only a 0.8 meter telescope, a standard photometric system, and an image processing pipeline, we expect to be able to detect any CW laser signal directed at us from an extraterrestrial civilization in M31, as long as the civilization is operating at a wavelength we can “see” and has left the beacon on long enough for us to detect it here on Earth. The search target is M31 due to its high stellar density relative to our own Milky Way galaxy. Andromeda is home to at least one trillion stars, and thus at least one trillion planets. As a result, in surveying M31, we are surveying one trillion planets, and consequently one trillion possible locations of intelligent life. This is an unprecedented number of targets relative to other past SETI searches. We call this the TPS or Trillion Planet Survey.
KEYWORDS: Space operations, Near field, Directed energy weapons, Geometrical optics, Near field optics, Phased array optics, Systems modeling, Wafer-level optics, Laser propulsion, Reflectivity
Directed energy is envisioned to drive wafer-scale spacecraft to relativistic speeds. Spacecraft propulsion is provided by a large array of lasers, either in Earth orbit or stationed on the ground. The directed-energy beam is focused on the spacecraft sail, and momentum from photons in the laser beam is transferred to the spacecraft as the beam reflects off of the sail. In order for the beam to be concentrated on the spacecraft, precise phase control of all the elements across the laser array will be required. Any phase misalignments within the array will give rise to pointing fluctuations and flux asymmetry in the beam, necessitating creative approaches to spacecraft stability and beam following. In order to simulate spacecraft acceleration using an array of phase-locked lasers, a near field intensity model of the laser array is required. This paper describes a light propagation model that can be used to calculate intensity patterns for the near-field diffraction of a phased array. The model is based on the combination of complex frequencies from an array of emitters as the beams from each emitter strike a target surface. Ray-tracing geometry is used to determine the distance from each point on an emitter optical surface to each point on the target surface, and the distance is used to determine the phase contribution. Simulations are presented that explore the effects of fixed and time-varying phase mis-alignments on beam pointing, beam intensity and focusing characteristics.
A phased array operates by modulating the phases of several signals, allowing electronic control over the locations that these signals interfere constructively or destructively, allowing the beam to be steered. A space-based laser phased array, called the Directed Energy System for Targeting of Asteroids and exploRation (DE-STAR) has previously been posited by our group for a number of uses, from planetary defense to relativistic propulsion of small probes. Here we propose using the same basic system topology as a receiver rather than a transmitter. All of the components in the system, excluding the laser, are bidirectional. Rather than each elements transmitting laser light, they would instead receive light, which will then be combined to create an interference pattern that can be imaged onto a focal plane. The Laser Array Space Telescope (LAST) uses most of the same components and metrology as DE-STAR and could thus be integrated into a singular system, allowing both transmit and receive modes. This paper discusses the possible applications of this system from laser communications to astrophysics.
KEYWORDS: Directed energy weapons, Space operations, Space reconnaissance, Semiconducting wafers, Doppler effect, Photons, Neodymium, Energy transfer, Rockets, Physics
This paper analyses the nature and feasibility of using directed energy to propel probes through space at relativistic speeds. Possible mission scenarios are considered by varying the spacecraft mass, thickness of the sail and power of the directed energy array. We calculate that gram-scaled probes are capable of achieving relativistic speeds and reaching Alpha Centauri well within a human lifetime. A major drawback is the diffraction of the beam which reduces the incident power on the sail resulting in a terminal velocity for the probes. Various notions of efficiency are discussed and we conclude that directed energy propulsion provides a viable direction for future space exploration.
KEYWORDS: Image filtering, Target detection, Signal to noise ratio, Galactic astronomy, Stars, Telescopes, Planets, Solar system, Strategic intelligence, Signal detection
We compute the detectability of directed-energy (DE) sources from distant civilizations that may exist. Recent advances in our own DE technology suggest that our eventual capabilities will radically enhance our capacity to broadcast our presence and hence allow us to ponder the reverse case of detection. We show that DE systems are detectable at vast distances, possibly across the entire horizon, which profoundly alters conceivable search strategies for extra-terrestrial, technologically-advanced civilizations. Even modest searches are extremely effective at detecting or constraining many civilization classes. A single civilization anywhere in our galaxy of comparable technological advancement to our own can be detected with near unity probability with a cluster of 0.1 m telescopes on Earth. A 1 m class telescope can detect a single civilization anywhere in the Andromeda galaxy. A search strategy is proposed using small Earth-based telescopes to observe 1012-1020 stellar and planetary systems. Such observations could address whether there exist other civilizations which are broadcasting with similar or more advanced DE capability. We show that such searches have near-unity probability of detecting comparably advanced civilizations anywhere in our galaxy within a few years, assuming the civilization: (1) adopts a simple “intelligent targeting” beacon strategy; (2) is beaconing at a wavelength we can detect; (3) broadcast the beacon long enough for the light to reach Earth now. In this blind-beacon, blind-search strategy, the civilization need not know where we are nor do we need to know where they are. The same basic strategy can be extended to extragalactic distances.
For interstellar missions, directed energy is envisioned to drive wafer-scale spacecraft to relativistic speeds. Spacecraft propulsion is provided by a large array of phase-locked lasers, either in Earth orbit or stationed on the ground. The directed-energy beam is focused on the spacecraft, which includes a reflective sail that propels the craft by reflecting the beam. Fluctuations and asymmetry in the beam will create rotational forces on the sail, so the sail geometry must possess an inherent, passive stabilizing effect. A hyperboloid shape is proposed, since changes in the incident beam angle due to yaw will passively counteract rotational forces. This paper explores passive stability properties of a hyperboloid reflector being bombarded by directed-energy beam. A 2D cross-section is analyzed for stability under simulated asymmetric loads. Passive stabilization is confirmed over a range of asymmetries. Realistic values of radiation pressure magnitude are drawn from the physics of light-mirror interaction. Estimates of beam asymmetry are drawn from optical modeling of a laser array far-field intensity using fixed and stochastic phase perturbations. A 3D multi-physics model is presented, using boundary conditions and forcing terms derived from beam simulations and lightmirror interaction models. The question of optimal sail geometry can be pursued, using concepts developed for the baseline hyperboloid. For example, higher curvature of the hyperboloid increases stability, but reduces effective thrust. A hyperboloid sail could be optimized by seeking the minimum curvature that is stable over the expected range of beam asymmetries.
We report on laboratory studies of the effectiveness of directed energy planetary defense as a part of the DE-STAR (Directed Energy System for Targeting of Asteroids and exploRation) program. DE-STAR and DE-STARLITE are directed energy “stand-off” and “stand-on” programs, respectively. These systems consist of a modular array of kilowatt-class lasers powered by photovoltaics, and are capable of heating a spot on the surface of an asteroid to the point of vaporization. Mass ejection, as a plume of evaporated material, creates a reactionary thrust capable of diverting the asteroid’s orbit. In a series of papers, we have developed a theoretical basis and described numerical simulations for determining the thrust produced by material evaporating from the surface of an asteroid. In the DESTAR concept, the asteroid itself is used as the deflection “propellant”. This study presents results of experiments designed to measure the thrust created by evaporation from a laser directed energy spot. We constructed a vacuum chamber to simulate space conditions, and installed a torsion balance that holds a common space target sample. The sample is illuminated with a fiber array laser with flux levels up to 60 MW/m2 , which allows us to simulate a mission level flux but on a small scale. We use a separate laser as well as a position sensitive centroid detector to readout the angular motion of the torsion balance and can thus determine the thrust. We compare the measured thrust to the models. Our theoretical models indicate a coupling coefficient well in excess of 100 μN/Woptical, though we assume a more conservative value of 80 μN/Woptical and then degrade this with an optical “encircled energy” efficiency of 0.75 to 60 μN/Woptical in our deflection modeling. Our measurements discussed here yield about 45 μN/Wabsorbed as a reasonable lower limit to the thrust per optical watt absorbed. Results vary depending on the material tested and are limited to measurements of 1 axis, so further tests must be performed.
KEYWORDS: Absorption, Black bodies, Molecular lasers, Spectroscopy, Molecular spectroscopy, Asteroids, Space operations, Comets, Laser induced breakdown spectroscopy, Solar system
We describe a novel method for probing bulk molecular and atomic composition of solid targets from a distant vantage. A laser is used to melt and vaporize a spot on the target. With sufficient flux, the spot temperature rises rapidly, and evaporation of surface materials occurs. The melted spot creates a high-temperature blackbody source, and ejected material creates a plume of surface materials in front of the spot. Molecular and atomic absorption occurs as the blackbody radiation passes through the ejected plume. Bulk molecular and atomic composition of the surface material is investigated by using a spectrometer to view the heated spot through the ejected plume. The proposed method is distinct from current stand-off approaches to composition analysis, such as Laser-Induced Breakdown Spectroscopy (LIBS), which atomizes and ionizes target material and observes emission spectra to determine bulk atomic composition. Initial simulations of absorption profiles with laser heating show great promise for Remote Laser-Evaporative Molecular Absorption (R-LEMA) spectroscopy. The method is well-suited for exploration of cold solar system targets—asteroids, comets, planets, moons—such as from a spacecraft orbiting the target. Spatial composition maps could be created by scanning the surface. Applying the beam to a single spot continuously produces a borehole or trench, and shallow subsurface composition profiling is possible. This paper describes system concepts for implementing the proposed method to probe the bulk molecular composition of an asteroid from an orbiting spacecraft, including laser array, photovoltaic power, heating and ablation, plume characteristics, absorption, spectrometry and data management.
KEYWORDS: Asteroids, Comets, Directed energy weapons, Finite element methods, Laser energy, Phased arrays, Earth's atmosphere, Laser systems engineering, Photovoltaics, Sun
Comets and Asteroids are viable threats to our planet; if these space rocks are smaller than 25 meters, they burn up in the atmosphere, but if they are wider than 25 meters they can cause damage to the impact area. Anything more than one to two kilometers can have worldwide effects, furthermore a mile-wide asteroid travelling at 30,000 miles per hour has the energy equal to a megaton bomb and is very likely to wipe out most of the life on Earth. Residents near Chelyabinsk, Russia experienced the detrimental effects of a collision with a Near-Earth Asteroid (NEA) on 15 February 2013 as a ~20 m object penetrated the atmosphere above that city. The effective yield from this object was approximately 1/2 Megaton TNT equivalent (Mt), or that of a large strategic warhead. The 1908 Tunguska event, also over Russia, is estimated to have had a yield of approximately 15 Mt and had the potential to kill millions of people had it come down over a large city1. In the face of such danger a planetary defense system is necessary and this paper proposes a design for such a system. DE-STAR (Directed Energy System for Targeting of Asteroids and exploRation) is a phased array laser system that can be used to oblate, deflect and de-spin asteroids and comets.
KEYWORDS: Comets, High power lasers, Optical simulations, Directed energy weapons, Asteroids, Sun, Photovoltaics, Solar system, Electroluminescent displays, Laser safety
Earth-crossing asteroids and comets pose a long-term hazard to life and property on Earth. Schemes to mitigate the impact threat have been studied extensively but tend to focus on asteroid diversion while neglecting the possibility of a comet threat. Such schemes often demand physically intercepting the target by spacecraft, a task feasible only for targets identified decades in advance in a restricted range of orbits. A threatening comet is unlikely to satisfy these criteria and so necessitates a fundamentally different approach for diversion. Comets are naturally perturbed from purely gravitational trajectories through solar heating of their surfaces which activates sublimation-driven jets. Artificial heating of a comet, such as by a high-powered laser array in Earth orbit, may supplement natural heating by the Sun to purposefully manipulate its path to avoid an impact. The effectiveness of any particular laser array for a given comet depends on the comet's heating response which varies dramatically depending on factors including nucleus size, orbit and dynamical history. These factors are incorporated into a numerical orbital model using established models of nongravitational perturbations to evaluate the effectiveness and feasibility of using high-powered laser arrays in Earth orbit or on the ground to deflect a variety of comets. Simulation results suggest that orbital arrays of 500m and 10GW operating for 10 min=d over 1 yr may be adequate for mitigating impacts by comets up to ~500m in diameter. Continuously operating ground-based arrays of 100m and 10GW may be similarly effective when appropriately located.
Arrays of phase-locked lasers are envisioned for planetary defense and exploration systems. High-energy beams focused on a threatening asteroid evaporate surface material, creating a reactionary thrust that alters the asteroid’s orbit. The same system could be used to probe an asteroid’s composition, to search for unknown asteroids, and to propel interplanetary and interstellar spacecraft. Phased-array designs are capable of producing high beam intensity, and allow beam steering and beam profile manipulation. Modular designs allow ongoing addition of emitter elements to a growing array. This paper discusses pointing control for extensible laser arrays. Rough pointing is determined by spacecraft attitude control. Lateral movement of the laser emitter tips behind the optical elements provides intermediate pointing adjustment for individual array elements and beam steering. Precision beam steering and beam formation is accomplished by coordinated phase modulation across the array. Added cells are incorporated into the phase control scheme by precise alignment to local mechanical datums using fast, optical relative position sensors. Infrared target sensors are also positioned within the datum scheme, and provide information about the target vector relative to datum coordinates at each emitter. Multiple target sensors allow refined determination of the target normal plane, providing information to the phase controller for each emitter. As emitters and sensors are added, local position data allows accurate prediction of the relative global position of emitters across the array, providing additional constraints to the phase controllers. Mechanical design and associated phase control that is scalable for target distance and number of emitters is presented.
Recently, there has been a dramatic change in the way space missions are viewed. Large spacecraft with massive propellant-filled launch stages have dominated the space industry since the 1960’s, but low-mass CubeSats and low-cost rockets have enabled a new approach to space exploration. In recent work, we have built upon the idea of extremely low mass (sub 1 kg), propellant-less spacecraft that are accelerated by photon propulsion from dedicated directed-energy facilities. Advanced photonics on a chip with hybridized electronics can be used to implement a laser-based communication system on board a sub 1U spacecraft that we call a WaferSat. WaferSat spacecraft are equipped with reflective sails suitable for propulsion by directed-energy beams. This low-mass spacecraft design does not require onboard propellant, creating significant new opportunities for deep space exploration at a very low cost. In this paper, we describe the design of a prototype WaferSat spacecraft, constructed on a printed circuit board. The prototype is envisioned as a step toward a design that could be launched on an early mission into Low Earth Orbit (LEO), as a key milestone in the roadmap to interstellar flight. In addition to laser communication, the WaferSat prototype includes subsystems for power source, attitude control, digital image acquisition, and inter-system communications.
Lasers are commonly used in high-precision measurement and profiling systems. Some laser measurement systems are based on interferometry principles, and others are based on active triangulation, depending on requirements of the application. This paper describes an active triangulation laser measurement system for a specific application wherein the relative position of two fixed, rigid mechanical components is to be measured dynamically with high precision in six degrees of freedom (DOF). Potential applications include optical systems with feedback to control for mechanical vibration, such as target acquisition devices with multiple focal planes. The method uses an array of several laser emitters mounted on one component. The lasers are directed at a reflective surface on the second component. The reflective surface consists of a piecewise-planar pattern such as a pyramid, or more generally a curved reflective surface such as a hyperbolic paraboloid. The reflected spots are sensed at 2-dimensional photodiode arrays on the emitter component. Changes in the relative position of the emitter component and reflective surface will shift the location of the reflected spots within photodiode arrays. Relative motion in any degree of freedom produces independent shifts in the reflected spot locations, allowing full six-DOF relative position determination between the two component positions. Response time of the sensor is limited by the read-out rate of the photodiode arrays. Algorithms are given for position determination with limits on uncertainty and sensitivity, based on laser and spot-sensor characteristics, and assuming regular surfaces. Additional uncertainty analysis is achievable for surface irregularities based on calibration data.
We report on laboratory studies of the effectiveness of directed energy planetary defense as a part of the DESTAR (Directed Energy System for Targeting of Asteroids and exploRation) program. DE-STAR [1][5][6] and DE-STARLITE [2][5][6] are directed energy "stand-off" and "stand-on" programs, respectively. These systems consist of a modular array of kilowatt-class lasers powered by photovoltaics, and are capable of heating a spot on the surface of an asteroid to the point of vaporization. Mass ejection, as a plume of evaporated material, creates a reactionary thrust capable of diverting the asteroid’s orbit. In a series of papers, we have developed a theoretical basis and described numerical simulations for determining the thrust produced by material evaporating from the surface of an asteroid [1][2][3][4][5][6]. In the DE-STAR concept, the asteroid itself is used as the deflection "propellant". This study presents results of experiments designed to measure the thrust created by evaporation from a laser directed energy spot. We constructed a vacuum chamber to simulate space conditions, and installed a torsion balance that holds an "asteroid" sample. The sample is illuminated with a fiber array laser with flux levels up to 60 MW/m2 which allows us to simulate a mission level flux but on a small scale. We use a separate laser as well as a position sensitive centroid detector to readout the angular motion of the torsion balance and can thus determine the thrust. We compare the measured thrust to the models. Our theoretical models indicate a coupling coefficient well in excess of 100 μN/Woptical, though we assume a more conservative value of 80 μN/Woptical and then degrade this with an optical "encircled energy" efficiency of 0.75 to 60 μN/Woptical in our deflection modeling. Our measurements discussed here yield about 45 μN/Wabsorbed as a reasonable lower limit to the thrust per optical watt absorbed.
Asteroids that threaten Earth could be deflected from their orbits using directed energy to vaporize the surface, because the ejected plume creates a reaction thrust that alters the asteroid’s trajectory. One concern regarding directed energy deflection is the rotation of the asteroid, as this will reduce the average thrust magnitude and modify the thrust direction. Flux levels required to evaporate surface material depend on surface material composition and albedo, thermal, and bulk mechanical properties of the asteroid, and rotation rate. The observed distribution of asteroid rotation rates is used, along with an estimated range of material and mechanical properties, as input to a 3D thermal-physical model to calculate the resultant thrust vector. The model uses a directed energy beam, striking the surface of a rotating sphere with specified material properties, beam profile, and rotation rate. The model calculates thermal changes in the sphere, including vaporization and mass ejection of the target material. The amount of vaporization is used to determine a thrust magnitude that is normal to the surface at each point on the sphere. As the object rotates beneath the beam, vaporization decreases, as the temperature drops and causes both a phase shift and magnitude decrease in the average thrust vector. A surface integral is calculated to determine the thrust vector, at each point in time, producing a 4D analytical model of the expected thrust profile for rotating objects.
Molecular composition of distant stars is explored by observing absorption spectra. The star produces blackbody radiation that passes through the molecular cloud of vaporized material surrounding the star. Characteristic absorption lines are discernible with a spectrometer, and molecular composition is investigated by comparing spectral observations with known material profiles. Most objects in the solar system—asteroids, comets, planets, moons—are too cold to be interrogated in this manner. Molecular clouds around cold objects consist primarily of volatiles, so bulk composition cannot be probed. Additionally, low volatile density does not produce discernible absorption lines in the faint signal generated by low blackbody temperatures. This paper describes a system for probing the molecular composition of cold solar system targets from a distant vantage. The concept utilizes a directed energy beam to melt and vaporize a spot on a distant target, such as from a spacecraft orbiting the object. With sufficient flux (~10 MW/m2), the spot temperature rises rapidly (to ~2 500 K), and evaporation of all materials on the target surface occurs. The melted spot creates a high-temperature blackbody source, and ejected material creates a molecular plume in front of the spot. Bulk composition is investigated by using a spectrometer to view the heated spot through the ejected material. Spatial composition maps could be created by scanning the surface. Applying the beam to a single spot continuously produces a borehole, and shallow sub-surface composition profiling is also possible. Initial simulations of absorption profiles with laser heating show great promise for molecular composition analysis.
Spacecraft accelerate by directing propellant in the opposite direction. In the traditional approach, the propellant is
carried on board in the form of material fuel. This approach has the drawback of being limited in Delta v by the amount of fuel launched with the craft, a limit that does not scale well to high Delta v due to the massive nature of the fuel. Directed energy photon propulsion solves this problem by eliminating the need for on-board fuel storage. We discuss our system which uses a phased array of lasers to propel the spacecraft which contributes no mass to the spacecraft beyond that of the reflector, enabling a prolonged acceleration and much higher final speeds. This paper compares the effectiveness of such a system for propelling spacecraft into interplanetary and interstellar space across various laser and sail configurations. Simulated parameters include laser power, optics size and orbit as well as payload mass, reflector size and the trajectory of the spacecraft. As one example, a 70 GW laser with 10 km optics could propel a 1 kg craft past Neptune (~30 au) in 5 days at 4% the speed of light, or a 1 g “wafer-sat” past Mars (~0.5 au) in 20 minutes at 21% the speed of light. However, even lasers down to 2 kW power and 1 m optics show noticeable effect on gram-class payloads, boosting their altitude in low Earth orbits by several kilometers per day which is already sufficient to be of practical use.
Travis Brashears, Philip Lubin, Gary Hughes, Kyle McDonough, Sebastian Arias, Alex Lang, Caio Motta, Peter Meinhold, Payton Batliner, Janelle Griswold, Qicheng Zhang, Yusuf Alnawakhtha, Kenyon Prater, Jonathan Madajian, Olivia Sturman, Jana Gergieva, Aidan Gilkes, Bret Silverstein
In the nearly 60 years of spaceflight we have accomplished wonderful feats of exploration and shown the incredible spirit of the human drive to explore and understand our universe. Yet in those 60 years we have barely left our solar system with the Voyager 1 spacecraft launched in 1977 finally leaving the solar system after 37 years of flight at a speed of 17 km/s or less than 0.006% the speed of light. As remarkable as this is, we will never reach even the nearest stars with our current propulsion technology in even 10 millennium. We have to radically rethink our strategy or give up our dreams of reaching the stars, or wait for technology that does not exist. While we all dream of human spaceflight to the stars in a way romanticized in books and movies, it is not within our power to do so, nor it is clear that this is the path we should choose. We posit a technological path forward, that while not simple; it is within our technological reach. We propose a roadmap to a program that will lead to sending relativistic probes to the nearest stars and will open up a vast array of possibilities of flight both within our solar system and far beyond. Spacecraft from gram level complete spacecraft on a wafer (“wafer sats”) that reach more than ¼ c and reach the nearest star in 15 years to spacecraft with masses more than 105 kg (100 tons) that can reach speeds of near 1000 km/s such systems can be propelled to speeds currently unimaginable with our existing propulsion technologies. To do so requires a fundamental change in our thinking of both propulsion and in many cases what a spacecraft is. In addition to larger spacecraft, some capable of transporting humans, we consider functional spacecraft on a wafer, including integrated optical communications, optical systems and sensors combined with directed energy propulsion. Since “at home” the costs can be amortized over a very large number of missions. The human factor of exploring the nearest stars and exo-planets would be a profound voyage for humanity, one whose non-scientific implications would be enormous. It is time to begin this inevitable journey beyond our home.
KEYWORDS: Semiconducting wafers, Space operations, Sun, Directed energy weapons, Solar energy, Sensors, Stars, CMOS sensors, Computer aided design, Space reconnaissance
The long standing approach to space travel has been to incorporate massive on-board electronics, probes and propellants to achieve space exploration. This approach has led to many great achievements in science, but will never help to explore the interstellar medium. Fortunately, a paradigm shift is upon us in how a spacecraft is constructed and propelled. This paper describes a mission concept to get to our Sun’s Gravity Lens at 550AU in less than 10 years. It will be done by using DE-STAR, a scalable solar-powered phased-array laser in Earth Orbit, as a directed energy photon drive of low-mass wafersats.
[1] [2] [3] [4] [5] With recent technologies a complete mission can be placed on a wafer including, power from an embedded radio nuclear thermal generator (RTG), PV, laser communications, imaging, photon thrusters for attitude control and other sensors. As one example, a futuristic 200 MW laser array consisting of 1 - 10 kw meter scale sub elements with a 100m baseline can propel a 10 gram wafer scale spacecraft with a 3m laser sail to 60AU/Year. Directed energy propulsion of low-mass spacecraft gives us an opportunity to capture images of Alpha Centauri and its planets, detailed imaging of the cosmic microwave background, set up interstellar communications by using gravity lenses around nearby stars to boost signals from interstellar probes, and much more. This system offers a very large range of missions allowing hundreds of wafer scale payload launches per day to reach this cosmological data reservoir. Directed Energy Propulsion is the only current technology that can provide a near-term path to utilize our Sun’s Gravity Lens.
Arrays of phase-locked lasers have been developed for numerous directed-energy applications. Phased-array designs are capable of producing higher beam intensity than similar sized multi-beam emitters, and also allow beam steering and beam profile manipulation. In phased-array designs, individual emitter phases must be controllable, based on suitable feedback. Most current control schemes sample individual emitter phases, such as with an array-wide beam splitter, and compare to a master phase reference. Reliance on a global beam splitter limits scalability to larger array sizes due to lack of design modularity. This paper describes a conceptual design and control scheme that relies only on feedback from the array structure itself. A modular and scalable geometry is based on individual hexagonal frames for each emitter; each frame cell consists of a conventional lens mounted in front of the fiber tip. A rigid phase tap structure physically connects two adjacent emitter frame cells. A target sensor is mounted on top of the phase tap, representing the local alignment datum. Optical sensors measure the relative position of the phase tap and target sensor. The tap senses the exit phase of both emitters relative to the target normal plane, providing information to the phase controller for each emitter. As elements are added to the array, relative local position data between adjacent phase taps allows accurate prediction of the relative global position of emitters across the array, providing additional constraints to the phase controllers. The approach is scalable for target distance and number of emitters without loss of control.
Laser ablation of a Near Earth Object (NEO) on a collision course with Earth produces a cloud of ejecta which exerts a thrust on the asteroid, deflecting it from its original trajectory. The DE-STAR system provides such a thrust by illuminating an Earth-targeting asteroid or comet from afar with a stand-off system consisting of a large phased-array laser in Earth orbit. A much smaller version of the same system called DE-STARLITE travels alongside the target, operating in a stand-on mode, slowly deflecting it over a long period. Such a stand-on system would also permit directing the thrust in any desired direction through careful positioning of the laser relative to the asteroid. We present orbital simulations comparing the effectiveness of both systems across a range of laser and asteroid parameters.
Simulated parameters include magnitude, duration and, for the stand-on system, direction of the thrust, as well as the size and orbital characteristics of the target asteroid. These simulations indicate that deflection distance is, in general, proportional to the magnitude of thrust, proportional to the square of the laser on time, and inversely proportional to the mass. Furthermore, deflection distance shows strong dependence on thrust direction with optimal direction varying with the asteroid's orbital eccentricity. As one example, we consider a 325 m asteroid in an orbit of eccentricity e=0.2; given
15 years of warning, a force of just 2 N from a stand-on DE-STARLITE system is sufficient to deflect the asteroid by 2 Earth radii. We discuss numerous scenarios and discuss a practical implementation of such a system consistent with current launch vehicle capabilities.
On 15 February 2013, a previously unknown ~20 m asteroid struck Earth near Chelyabinsk, Russia, releasing kinetic energy equivalent to ~570 kt TNT. Detecting objects like the Chelyabinsk impactor that are orbiting near Earth is a difficult task, in part because such objects spend much of their own orbits in the direction of the Sun when viewed from Earth. Efforts aimed at protecting Earth from future impacts will rely heavily on continued discovery. Ground-based optical observatory networks and Earth-orbiting spacecraft with infrared sensors have dramatically increased the pace of discovery. Still, less than 5% of near-Earth objects (NEOs) ≥100 m/~100 Mt TNT have been identified, and the proportion of known objects decreases rapidly for smaller sizes. Low emissivity of some objects also makes detection by passive sensors difficult. A proposed orbiting laser phased array directed energy system could be used for active illumination of NEOs, enhancing discovery particularly for smaller and lower emissivity objects. Laser fiber amplifiers emit very narrow-band energy, simplifying detection. Results of simulated illumination scenarios are presented based on an orbiting emitter array with specified characteristics. Simulations indicate that return signals from small and low emissivity objects is strong enough to detect. The possibility for both directed and full sky blind surveys is discussed, and the resulting diameter and mass limits for objects in different observational scenarios. The ability to determine both position and speed of detected objects is also discussed.
We present results of optical simulations for a laser phased array directed energy system. The laser array consists of individual optical elements in a square or hexagonal array. In a multi-element array, the far-field beam pattern depends on both mechanical pointing stability and on phase relationships between individual elements. The simulation incorporates realistic pointing and phase errors. Pointing error components include systematic offsets to simulate manufacturing and assembly variations. Pointing also includes time-varying errors that simulate structural vibrations, informed from random vibration analysis of the mechanical design. Phase errors include systematic offsets, and time-varying errors due to both mechanical vibration and temperature variation in the fibers. The optical simulation is used to determine beam pattern and pointing jitter over a range of composite error inputs. Results are also presented for a 1 m aperture array with 10 kW total power, designed as a stand-off system on a dedicated asteroid diversion/capture mission that seeks to evaporate the surface of the target at a distance of beyond 10 km. Phase stability across the array of λ/10 is shown to provide beam control that is sufficient to vaporize the surface of a target at 10 km. The model is also a useful tool for characterizing performance for phase controller design in relation to beam formation and pointing.
This paper presents the motivation behind and design of a directed energy planetary defense system that utilizes laser ablation of an asteroid to impart a deflecting force on the target. The proposed system is called DE-STARLITE for Directed Energy System for Targeting of Asteroids and ExploRation – LITE as it is a small, stand-on unit of a larger standoff DE-STAR system. Pursuant to the stand-on design, ion engines will propel the spacecraft from low-Earth orbit (LEO) to the near-Earth asteroid (NEA). During laser ablation, the asteroid itself becomes the "propellant"; thus a very modest spacecraft can deflect an asteroid much larger than would be possible with a system of similar mission mass using ion beam deflection (IBD) or a gravity tractor. DE-STARLITE is capable of deflecting an Apophis-class (325 m diameter) asteroid with a 15-year targeting time. The mission fits within the rough mission parameters of the Asteroid Redirect Mission (ARM) program in terms of mass and size and has much greater capability for planetary defense than current proposals and is readily scalable to the threat. It can deflect all known threats with sufficient warning.
Asteroids that threaten Earth could be deflected from their orbits using laser directed energy or concentrated solar energy to vaporize the surface; the ejected plume would create a reaction thrust that pushes the object away from its collision course with Earth. One concern regarding directed energy deflection approaches is that asteroids rotate as they orbit the Sun. Asteroid rotation reduces the average thrust and changes the thrust vector imparting a time profile to the thrust. A directed energy system must deliver sufficient flux to evaporate surface material even when the asteroid is rotating. Required flux levels depend on surface material composition and albedo, thermal and bulk mechanical properties of the asteroid, and asteroid rotation rate. In the present work we present results of simulations for directed energy ejecta-plume asteroid threat mitigation. We use the observed distribution of asteroid rotational rates, along with a range of material and mechanical properties, as input to a thermal-physical model of plume generation. We calculate the expected thrust profile for rotating objects. Standoff directed energy schemes that deliver at least 10 MW/m2 generate significant thrust for all but the highest conceivable rotation rates.
Asteroids and comets that cross Earth’s orbit pose a credible risk of impact, with potentially severe disturbances to Earth and society. We propose an orbital planetary defense system capable of heating the surface of potentially hazardous objects to the vaporization point as a feasible approach to impact risk mitigation. We call the system DE-STAR, for Directed Energy System for Targeting of Asteroids and exploRation. The DE-STAR is a modular-phased array of kilowatt class lasers powered by photovoltaic’s. Modular design allows for incremental development, minimizing risk, and allowing for technological codevelopment. An orbiting structure would be developed in stages. The main objective of the DE-STAR is to use focused directed energy to raise the surface spot temperature to ∼3000 K, sufficient to vaporize all known substances. Ejection of evaporated material creates a large reaction force that would alter an asteroid’s orbit. The baseline system is a DE-STAR 3 or 4 (1- to 10-km array) depending on the degree of protection desired. A DE-STAR 4 allows initial engagement beyond 1 AU with a spot temperature sufficient to completely evaporate up to 500-m diameter asteroids in 1 year. Small objects can be diverted with a DE-STAR 2 (100 m) while space debris is vaporized with a DE-STAR 1 (10 m).
Asteroids and comets that cross Earth’s orbit pose a credible risk of impact, with potentially severe disturbances to Earth and society. Numerous risk mitigation strategies have been described, most involving dedicated missions to a threatening object. We propose an orbital planetary defense system capable of heating the surface of potentially hazardous objects to the vaporization point as a feasible approach to impact risk mitigation. We call the system DE-STAR for Directed Energy System for Targeting of Asteroids and exploRation. DE-STAR is a modular phased array of kilowatt class lasers powered by photovoltaic's. Modular design allows for incremental development, test, and initial deployment, lowering cost, minimizing risk, and allowing for technological co-development, leading eventually to an orbiting structure that would be developed in stages with both technological and target milestones. The main objective of DE-STAR is to use the focused directed energy to raise the surface spot temperature to ~3,000K, allowing direct vaporization of all known substances. In the process of heating the surface ejecting evaporated material a large reaction force would alter the asteroid’s orbit. The baseline system is a DE-STAR 3 or 4 (1-10km array) depending on the degree of protection desired. A DE-STAR 4 allows for asteroid engagement starting beyond 1AU with a spot temperature sufficient to completely evaporate up to 500-m diameter asteroids in one year. Small asteroids and comets can be diverted/evaporated with a DESTAR 2 (100m) while space debris is vaporized with a DE-STAR 1 (10m).
KEYWORDS: Reflectors, Space operations, Asteroids, Directed energy weapons, Reflectivity, Phased arrays, Darmstadtium, Solar system, Defense systems, Defense and security
We propose a directed energy orbital planetary defense system capable of heating the surface of potentially hazardous objects to the evaporation point as a futuristic but feasible approach to impact risk mitigation. The system is based on recent advances in high efficiency photonic systems. The system could also be used for propulsion of kinetic or nuclear tipped asteroid interceptors or other interplanetary spacecraft. A photon drive is possible using direct photon pressure on a spacecraft similar to a solar sail. Given a laser power of 70GW, a 100 kg craft can be propelled to 1AU in approximately 3 days achieving a speed of 0.4% the speed of light, and a 10,000 kg craft in approximately 30 days. We call the system DE-STAR for Directed Energy System for Targeting of Asteroids and exploRation. DE-STAR is a modular phased array of solid-state lasers, powered by photovoltaic conversion of sunlight. The system is scalable and completely modular so that sub elements can be built and tested as the technology matures. The sub elements can be immediately utilized for testing as well as other applications including space debris mitigation. The ultimate objective of DE-STAR would be to begin direct asteroid vaporization and orbital modification starting at distances beyond 1 AU. Using phased array technology to focus the beam, the surface spot temperature on the asteroid can be raised to more than 3000K, allowing evaporation of all known substances. Additional scientific uses of DE-STAR are also possible.
Current strategies for diverting threatening asteroids require dedicated operations for every individual object. We propose a stand-off, Earth-orbiting system capable of vaporizing the surface of asteroids as a futuristic but feasible approach to impact risk mitigation. We call the system DE-STAR (Directed Energy System for Targeting of Asteroids and exploRation). DE-STAR is a modular phased array of laser amplifiers, powered by solar photovoltaic panels. Lowcost development of test systems is possible with existing technology. Larger arrays could be tested in sub-orbital demonstrations, leading eventually to an orbiting system. Design requirements are established by seeking to vaporize the surface of an asteroid, with ejected material creating a reaction force to alter the asteroid’s orbit. A proposed system goal would be to raise the surface spot temperature to <3,000K, evaporating all known substances. Engagement distance required for successful diversion depends on the asteroid’s mass, composition and approach velocity. Distance to focus and desired surface spot temperature then determine laser array size. Volatile-laden objects (such as comets) ~100m wide and approaching at 5km/s could be diverted by initiating engagement at ~0.05AU, requiring a laser array of ~100m side length. Phased array configuration allows multiple beams, so a single DE-STAR of sufficient size would be capable of targeting several threats simultaneously. An orbiting DE-STAR could serve diverse scientific objectives, such as propulsion of kinetic asteroid interceptors or other interplanetary spacecraft. Vaporization of debris in Earth orbit could be accomplished with a ~10m array. Beyond the primary task of Earth defense, numerous functions are envisioned.
We present work on the development of a long range standoff concealed weapons detection system capable of imaging
under very heavy clothing at distances exceeding 100 m with a cm resolution. The system is based off a combination of
phased array technologies used in radio astronomy and SAR radar by using a coherent, multi-frequency reconstruction
algorithm which can run at up to 1000 Hz frame rates and high SNR with a multi-tone transceiver. We show the flexible
design space of our system as well as algorithm development, predicted system performance and impairments, and
simulated reconstructed images. The system can be used for a variety of purposes including portal applications, crowd
scanning and tactical situations. Additional uses include seeing through dust and fog.
We describe the optical design of a sky survey system comprised of small aperture telescope tube assemblies mounted
on a common semi-equatorial frame with a single polar axis. It is the first ground-based instrument to create a map of
transients down to optical m=17 by imaging a fixed-declination strip of the sky on a nightly basis. The system is fully
remotely automated and physically robust. The mount tracks the sky using a motion controller, drive motor, and a laser
rotary encoder. The prototype configuration is suited to house up to 6 telescopes on the current mount and is easily
expandable to accommodate up to 30 telescopes which would enable full sky coverage if one system each were placed in
the Northern and Southern Hemispheres1.
We have developed an ultra-low noise 94 GHz MMIC amplifier using InGaAs/InAlAs/InP transistor technology. The MMIC designs incorporate a single transistor stage with input and output matching networks as well as gate and drain bias networks. Two MMICs have been incorporated into a single housing providing 10 dB of gain. At room temperature, the integrated amplifier has a measured noise of 365 K at 94 GHz. Cryogenic measurements have been performed using a direct detection total power radiometer with all amplification provided by MMIC amplifiers. The noise figure for the entire radiometer has been measured to be 78 K. The noise figure for the cryogenic InP MMIC 2-stage amplifier unit has been measured to be 51 K with a low power consumption of 0.84 mW per stage. The stability of the radiometer with a 4 GHz bandwidth, is characterized by a power spectrum with a '1/f knee' frequency of 45 Hz.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.