For any given technology in the logic foundry business it is highly desirable to offer a dense SRAM design which can be manufactured using the same mask and wafer toolsets as the base design. This paper discusses the lithographic issues related to imaging a pseudo-0.11 um technology within a 0.13 um ground rule, including optical proximity correction, design, mask making issues, and comparison of top-down SEM to simulation. To achieve a dense SRAM and quick turn around on design shrinks, simulation and experimental feedback are key. In this study, SRAM cells were redesigned, and a well calibrated resist and etch bias model, in conjunction with a fast micro lithographic aerial image simulator and mask model, were used to predict and optimize the printed shapes through all critical levels. One of the key issues is the ability to correlate and feedback experimental data into the resist simulation. Experimental results using attenuated phase shift masks and state-of-the-art resist process technology are compared to the simulation.
Low dielectric constant materials in the back-end-of-line process are needed to reduce resistive-capacitive delays due to continually shrinking interconnect dimensions. Several organic dielectrics which have etch rates similar to photoresists, such as benzocyclobutene and diamond-like carbon, have been explored for compatibility with lithographic processes. In this paper we discuss integration issues from a lithographic perspective, including low-k materials selection and properties, integration sequences, use of hard masks and the effects on reflectivity, resist process compatibility and focus effects using an advanced DUV scanning system.
An important component of a photoresist formulation is the photoactive compound. In conventional I-line resist, it is the DNQ molecule. In chemically amplified resists, it is the photoacid generator or the PAG. This component acts as the link between the exposure tool and the photoresist system. While PAGs for the 248 nm or DUV application are plenty, there is little effort in the arena of i-line PAGs. Typically, energy transfer in i-line lithography is achieved by using a DUV PAG in conjunction with an i-line energy transfer agent called sensitizer. This combination works very well, as described by workers before. This paper describes a polymer-bound sensitizer, which while maintaining the performance characteristics of a monomeric sensitizer, also enhances the solubility characteristics and the thermal stability of the resist.
Through the use of phase shift techniques, focus errors have been demonstrated to result in easily measurable overlay shifts in printed resist patterns. Using box-in-box with phase shifter design, patterns are printed on wafers and measured on standard overlay equipment. Results are compared to more conventional methods of focus detection. Details include measurement and calibration methodology, focus, and focus tilt results. Additionally, SPC in IBM's ASTC Fab is demonstrated with the Phase Shift Focus Monitor.
In order to decide if a given process window is sufficient for volume production without suffering from a significant yield loss, a clear understanding of the process capability is required. Therefore we performed a statistical analysis of all potential contributions for process variations and drifts and evaluated their magnitude for state-of-the-art equipment and processes. Since lithography related fails are not uniformly distributed across the wafer we developed a model to simulate the focus errors across the exposure field and across the wafer. We also developed a yield model, which gives a realistic yield loss number for a given process window. By using these models we show areas of potential improvement, which allow support of processes with significantly less focus latitude. We also investigated field size dependence of focus control and compared the step and repeat and step and scan systems, showing a significant advantage for step and scan systems. All of these findings are not specific to the exposure wavelength, so that they can be easily applied to Deep UV lithography.
Simulation has been used to better understand the process parameters which affect focus monitor performance. Full resist process simulations were done using PROLITH/2. Exposure dose, partial coherence and focus monitor linewidth were varied, assuming an aberration-free lens. The focus monitor result was in good agreement with simulations of two traditional focus test approaches. Simulations were also done with optics having significant third order spherical aberration. In this case, the results of the two traditional focus methods differed with each other, and the focus monitor gave another significantly different result. The focal plane of the aberrated lens depends on what pattern is being printed. Determining the crossing point of focus monitor calibration curves with different partial coherence may allow the lithographic measurement of spherical aberration. This paper also outlines recommendations for the practical use of the focus monitor, along with two examples. The first example illustrates a lens heating problem when using a stepper at a non-standard (sigma) value. The second example demonstrates a focus problem at the edge of the wafer caused by a non-flat chuck.
The focus monitor technique has been shown to be a unique and promising method of characterizing lithography tools. The focus monitor test mask employs phase shifting to translate focus error into a measurable overlay error, independent of exposure. We have also employed an exposure monitor structure to measure dose, independent of focus. The combination of focus and exposure monitors is highly sensitive to factors which affect critical dimensions. Using this test mask we have systematically analyzed the performance of the photo processing tools on our line. This paper will review the data and discuss process capability improvements using both methodologies.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.